This manual page documents briefly the
is the command line version of
This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.
is a status monitor for EPSON ink jet printer
you will be able to display the remaining ink quantity and the state of your printer. Operation as check nozzle, clean nozzle and align head are also implemented.
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
Specify the device file associated with the printer. Depending on what kind of printer you have, it could be /dev/parport, /dev/usb/lp0...
Specify the printer or the entry number corresponding to your printer. If not supplied, the program try to guess what kind of printer you have.
To command the reset of the printer.
Print a pattern. You can then check if nozzle are well aligned.
This is the default option. It prints the remaining quantities of ink in each cartridge.
Show version of program.
Show all the printer handled by the program.
Begin an head alignement.
Exchange the cartridge (not all printer).
Show the identity of the printer.
Disable autodetection of the printer.
This manual page was written by
Sylvain Le Gall
for the Debian GNU/Linux system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the
Lesser General Public License, Version 2.1 or any later version published by the Free Software Foundation; considering as source code all the file that enable the production of this manpage.