Poster of Linux kernelThe best gift for a Linux geek
CUnit

CUnit

Section: CUnit Programmer's Manual (3) Updated: August 2004
Local index Up

 

NAME

CUnit - A unit testing framework for C

 

SYNOPSIS

#include <CUnit/CUnit.h>
ASSERT definitions, test management.
#include <CUnit/Automated.h>
Automated interface with xml output.
#include <CUnit/Basic.h>
Basic interface with console output.
#include <CUnit/Console.h>
Interactive console interface.
#include <CUnit/CUCurses.h>
Interactive curses interface.

 

DESCRIPTION

CUnit is a system for writing, administering, and running unit tests in C. It uses a simple framework for building test structures, and provides a rich set of assertions for testing common data types. CUnit is built as a static library which is linked with the user's testing code.

 

STRUCTURE & GENERAL USAGE

CUnit is a combination of a platform-independent framework with various user interfaces. The core framework provides basic support for managing a test registry, suites, and test cases. The user interfaces facilitate interaction with the framework to run tests and view results.

The basic hierarchichal organization of CUnit is depicted here:



                  Test Registry
                        |
           -----------------------------
           |                           |
        Suite '1'      . . . .      Suite 'N'
           |                           |
     ---------------             ---------------
     |             |             |             |
  Test '11' ... Test '1M'     Test 'N1' ... Test 'NM'

Individual test cases are packaged into suites, which are registered with the active test registry. Suites can have setup and teardown functions which are automatically called before and after running the suite's tests. All suites/tests in the registry may be run using a single function call, or selected suites or tests can be run.

The typical usage of CUnit is:

1. Write functions for tests (and suite init/cleanup if necessary).
2. Initialize the test registry using CU_initialize_registry()
3. Add test suites to the registry using CU_add_suite()
4. Add test cases to the suites using CU_add_test()
5. Run tests using the desired interface, e.g.
CU_console_run_tests() to use the interactive console.
6. Cleanup the test registry using CU_cleanup_registry()

All public names in CUnit are prefixed with 'CU_'. This helps minimize clashes with names in user code. Note that earlier versions CUnit used different names without this prefix. The older API names are deprecated but still supported. To use the older names, user code must now be compiled with USE_DEPRECATED_CUNIT_NAMES defined.

 

WRITING TEST FUNCTIONS

A "test" is a C function having the signature: void test_func(void). There are no restrictions on the content of a test function, except that it should not modify the CUnit framework (e.g. add suites or tests, modify the test registry, or initiate a test run). A test function may call other functions (which also may not modify the framework). Registering a test will cause it's function to be run when the test is run.

CUnit provides a set of assertions for testing logical conditions. The success or failure of these assertions is tracked by the framework, and can be viewed when a test run is complete. Each assertion tests a single logical condition, and fails if the condition evaluates to CU_FALSE. Upon failure, the test continues unless the user chooses the 'xxx_FATAL' version of an assertion. In that case, the test function returns immediately.

CUnit provides a set of assertions for testing logical conditions. The success or failure of these assertions is tracked by the framework, and can be viewed when a test run is complete.

Each assertion tests a single logical condition, and fails if the condition evaluates to CU_FALSE. Upon failure, the test function continues unless the user chooses the 'xxx_FATAL' version of an assertion. In that case, the test function is aborted and returns immediately. FATAL versions of assertions should be used with caution! There is no opportunity for the test function to clean up after itself once a FATAL assertion fails. The normal suite cleanup function is not affected, however.

There are also special "assertions" for registering a pass or fail with the framework without performing a logical test. These are useful for testing flow of control or other conditions not requiring a logical test.

Other functions called by a registered test function may use the CUnit assertions freely. These assertions will be counted for the calling function. They may also use FATAL versions of assertions - failure will abort the original test function and its entire call chain.

The assertions defined by CUnit are:

#include <CUnit/CUnit.h>

CU_ASSERT(int expression)
CU_ASSERT_FATAL(int expression)
CU_TEST(int expression)
CU_TEST_FATAL(int expression)

Assert that expression is CU_TRUE (non-zero).

CU_ASSERT_TRUE(value)
CU_ASSERT_TRUE_FATAL(value)

Assert that value is CU_TRUE (non-zero).

CU_ASSERT_FALSE(value)
CU_ASSERT_FALSE_FATAL(value)

Assert that value is CU_FALSE (zero).

CU_ASSERT_EQUAL(actual, expected)
CU_ASSERT_EQUAL_FATAL(actual, expected)

Assert that actual == expected.

CU_ASSERT_NOT_EQUAL(actual, expected)
CU_ASSERT_NOT_EQUAL_FATAL(actual, expected)

Assert that actual != expected.

CU_ASSERT_PTR_EQUAL(actual, expected)
CU_ASSERT_PTR_EQUAL_FATAL(actual, expected)

Assert that pointers actual == expected.

CU_ASSERT_PTR_NOT_EQUAL(actual, expected)
CU_ASSERT_PTR_NOT_EQUAL_FATAL(actual, expected)

Assert that pointers actual != expected.

CU_ASSERT_PTR_NULL(value)
CU_ASSERT_PTR_NULL_FATAL(value)

Assert that pointer value == NULL.

CU_ASSERT_PTR_NOT_NULL(value)
CU_ASSERT_PTR_NOT_NULL_FATAL(value)

Assert that pointer value != NULL.

CU_ASSERT_STRING_EQUAL(actual, expected)
CU_ASSERT_STRING_EQUAL_FATAL(actual, expected)

Assert that strings actual and expected are equivalent.

CU_ASSERT_STRING_NOT_EQUAL(actual, expected)
CU_ASSERT_STRING_NOT_EQUAL_FATAL(actual, expected)

Assert that strings actual and expected differ.

CU_ASSERT_NSTRING_EQUAL(actual, expected, count)
CU_ASSERT_NSTRING_EQUAL_FATAL(actual, expected, count)

Assert that 1st count chars of actual and expected are the same.

CU_ASSERT_NSTRING_NOT_EQUAL(actual, expected, count)
CU_ASSERT_NSTRING_NOT_EQUAL_FATAL(actual, expected, count)

Assert that 1st count chars of actual and expected differ.

CU_ASSERT_DOUBLE_EQUAL(actual, expected, granularity)
CU_ASSERT_DOUBLE_EQUAL_FATAL(actual, expected, granularity)

Assert that |actual - expected| <= |granularity|.
Math library must be linked in for this assertion.

CU_ASSERT_DOUBLE_NOT_EQUAL(actual, expected, granularity)
CU_ASSERT_DOUBLE_NOT_EQUAL_FATAL(actual, expected, granularity)

Assert that |actual - expected| > |granularity|.
Math library must be linked in for this assertion.

CU_PASS(message)

Register a success without performing a logical test.

CU_FAIL(message)
CU_FAIL_FATAL(message)

Register a failure without performing a logical test.

 

THE TEST REGISTRY

The test registry is the repository for suites and associated tests. The user normally only needs to initialize the registry before use and clean up afterwards. However, other functions are provided to manipulate the registry when necessary.

The main functions needed by clients are:

#include <CUnit/TestDB.h> (included automatically by <CUnit/CUnit.h>)

CU_ErrorCode CU_initialize_registry(void)
Initializes the framework. This function should be called before any other CUnit functions. Failure to do so will likely result in a crash. An error status code is returned:
CUE_SUCCESS
if initialization is successful.
CUE_NOMEMORY
if memory allocation failed.

CU_BOOL CU_registry_initialized(void)
Checks whether the framework has been initialized. This may be useful if the registry setup is distributed over multiple files that need to make sure the registry is ready for test registration.

void CU_cleanup_registry(void)
Cleans up and releases memory used by the framework. No CUnit functions (other than CU_initialize_registry() ) should be called after this function. Failure to call CU_cleanup_registry() will result in memory leaks. Note also that this function will destroy all suites (and associated tests) in the registry.

Other registry functions are primarily for internal and testing purposes. However, general users may find use for them and should be aware of them. These include:

CU_pTestRegistry CU_get_registry(void)
Retrieve a pointer to the active test registry. The registry is a variable of data type CU_Testregistry (declared in <CUnit/TestDB.h>). Note that the returned pointer will be invalidated by a call to CU_cleanup_registry() or CU_initialize_registry() .

CU_pTestRegistry CU_set_registry(CU_pTestRegistry pTestRegistry)
Replace the active registry with the specified one. A pointer to the previous registry is returned. It is the caller's responsibility to destroy the old registry. This can be accomplished using CU_destroy_existing_registry() on the returned pointer. Alternatively, the old registry can be set as the active one. A subsequent call to CU_cleanup_registry() will then destroy it automatically. Care should be taken not to explicitly destroy a registry that is set as the active one. This will result in multiple frees of the same memory and a likely crash.
CU_pTestRegistry CU_create_new_registry(void)
Create a new registry and return a pointer to it. The new registry will not contain any suites or tests. It is the caller's responsibility to destroy the new registry by one of the mechanisms described previously.
void CU_destroy_existing_registry(CU_pTestRegistry* ppRegistry)
Destroy the specified test registry, including any registered suites. This function should not be called for a registry which is set as the active test registry. This will result in a multiple free of the same memory when CU_cleanup_registry() is called. ppRegistry may not be NULL, but the pointer it points to may be. Note that *ppRegistry will be NULL on return.

 

MANAGING TESTS AND SUITES

In order for a test to be run by CUnit, it must be added to a test collection (suite) which is registered with the test registry.  

Adding Suites to the Registry

The first step in setting up a test system is creating and registering one or more test collections (suites). Each suite has a name which must be unique among all suites registered with the test registry. The current implementation does not support the creation of suites independent of the test registry. Suites are simultaneously created and added to the active registry as follows.

#include <CUnit/TestDB.h> (included automatically by <CUnit/CUnit.h>)

CU_pSuite CU_add_suite(const char* strName, CU_InitializeFunc pInit,
CU_CleanupFunc pClean)" This creates and registers a new suite having the specified name, initialization function, and cleanup function. A pointer to the new suite is returned for use in adding tests to the suite. If an error occurs during the operation, NULL is returned and the framework error status is set as follows:
CUE_NOREGISTRY
Test Registry is not initialized.
CUE_NO_SUITENAME
Suite name is not specified or NULL.
CUE_DUP_SUITE
The registry already has a suite with this name.
CUE_NOMEMORY
Memory allocation failed.
The initialization and cleanup functions are optional. Both are C functions having the signature int func_name(void). These functions can perform setup and teardown operations needed to support the suite's tests. They are called before and after the suite's tests are run, even if only 1 of the suite's tests is run. They take no arguments, and should return NULL if they complete successfully (non-NULL otherwise). If either function is not required for a particular suite, pass NULL to CU_add_suite().

 

Adding Tests to Suites

Tests are created and added to suites. Each test has a name which must be unique among all tests added to a single suite. The current implementation does not support the creation of tests independent of registered suites. Tests are simultaneously created and added to a suite as follows.

#include <CUnit/TestDB.h> (included automatically by <CUnit/CUnit.h>)

CU_pTest CU_add_test(CU_pSuite pSuite, const char* strName, CU_TestFunc
pTestFunc)" This creates a new test having the specified name and test function, and adds it to the indicated suite. The suite should have been previously created using CU_add_suite(). A pointer to the new test is returned. If an error occurs during the operation, NULL is returned and the framework error status is set as follows:
CUE_NOSUITE
Specified suite is NULL or invalid.
CUE_NO_TESTNAME
Test name is not specified or NULL.
CUE_NOTEST
Test function is not specified or NULL.
CUE_DUP_TEST
The suite already has a test with this name.
CUE_NOMEMORY
Memory allocation failed.

 

RUNNING TESTS

CUnit supports running all tests in all registered suites, but individual tests or suites can also be run. During each run, the framework keeps track of the number of suites, tests, and assertions run, passed, and failed. Note that the results are cleared each time a test run is initiated (even if it fails).

While CUnit provides primitive functions for running suites and tests, most users will want to use one of the user interfaces. These interfaces handle the details of interaction with the framework and provide output of test details and results for the user. For more about the primitive functions, see <CUnit/testRun.h>.

 

Test Results

The interfaces present results of test runs, but client code may sometimes need to access the results directly. These results include various run counts, as well as a linked list of failure records holding the failure details. Test results must be retrieved before attempting to run other tests, which resets the result information. Functions for accessing the test results are:

#include <CUnit/TestRun.h> (included automatically by <CUnit/CUnit.h>)

unsigned int CU_get_number_of_suites_run(void)'
Retrieve the number of suites run. Suite having initialization functions which fail are not run. To get the total number of registered suites, use CU_get_registry()->uiNumberOfSuites.
unsigned int CU_get_number_of_suites_failed(void)
Retrieve the number of suites which had initialization or cleanup functions which failed (returned non-NULL).
unsigned int CU_get_number_of_tests_run(void)
Retrieve the number of tests run. Tests in suites having initialization functions which fail are not run. To get the total number of registered tests , use CU_get_registry()->uiNumberOfTests.
unsigned int CU_get_number_of_tests_failed(void)
Retrieve the number of tests which contained at least 1 failed assertion.
unsigned int CU_get_number_of_asserts(void)
Retrieve the number of CUnit assertions made during the test run.
unsigned int CU_get_number_of_successes(void)
Retrieve the number of assertions which passed.
unsigned int CU_get_number_of_failures(void)
Retrieve the number of assertions which failed.
const CU_pRunSummary CU_get_run_summary(void)
Retrieve a CU_RunSummary containing all the run count information. This data structure is declared in <CUnit/TestRun.h> and includes the (self-explanatory) unsigned int fields nSuitesRun, nSuitesFailed, nTestsRun, nTestsFailed, nAsserts, and nAssertsFailed.
const CU_pFailureRecord CU_get_failure_list(void)
Retrieve the head of the linked list of failure records for the last run. Each assertion failure or suite init/cleanup function failure is registered in a new CU_FailureRecord in the linked list. This data structure is declared in <CUnit/TestRun.h> and includes the following fields:
unsigned int uiLineNumber
char* strFileName
char* strCondition
CU_pTest pTest
CU_pSuite pSuite

 

Automated Interface

The automated interface is non-interactive. The current implementation only supports running all registered suites. Results are output to an xml file to be viewed by appropriate external tools. Registered tests can also be listed to an xml file for viewing. The following public functions are available:

#include <CUnit/Automated.h>

void CU_automated_run_tests(void)
Run all tests in all registered suites. Results are output to a file named ROOT-Results.xml. The filename 'ROOT' is set using CU_set_output_filename(), or else the default 'CUnitAutomated' is used. This means that the same filename is used each run (and the results file overwritten) if the user does not explicitly set the 'ROOT' for each run.
CU_ErrorCode CU_list_tests_to_file(void)
Lists the registered suites and associated tests to file. The listing file is named ROOT-Listing.xml. The filename 'ROOT' is set using CU_set_output_filename(), or else the default 'CUnitAutomated' is used. This means that the same filename is used each run (and the listing file overwritten) if the user does not explicitly set the 'ROOT' for each run.
void CU_set_output_filename(const char* szFilenameRoot)
Set the filename root to use for automated results and listing files.

 

Basic Interface (non-interactive)

The basic interface is also non-interactive, with results output to stdout. This interface supports running individual suites or tests, and allows client code to control the type of output displayed during each run. This interface provides the most flexibility to clients desiring simplified access to the CUnit API. The following public functions are provided:

#include <CUnit/Basic.h>

CU_ErrorCode CU_basic_run_tests(void)
Run all tests in all registered suites. Returns the 1st error code occurring during the test run. The type of output is controlled by the current run mode, which can be set using CU_basic_set_mode().
CU_ErrorCode CU_basic_run_suite(CU_pSuite pSuite)
Run all tests in single specified suite. Returns the 1st error code occurring during the test run. The type of output is controlled by the current run mode.
CU_ErrorCode CU_basic_run_test(CU_pSuite pSuite, CU_pTest pTest)
Run a single test in a specified suite. Returns the 1st error code occurring during the test run. The type of output is controlled by the current run mode.
void CU_basic_set_mode(CU_BasicRunMode mode)
Set the basic run mode, which controls the output during the run. Choices are:
CU_BRM_NORMAL
Failures and run summary are printed.
CU_BRM_SILENT
No output is printed except error messages.
CU_BRM_VERBOSE
Maximum output of run details.
CU_BasicRunMode CU_basic_get_mode(void)
Retrieve the current basic run mode code.
void CU_basic_show_failures(CU_pFailureRecord pFailure)
Prints a summary of all failures to stdout. Does not depend on the run mode.

 

Interactive Console Interface

The console interface is interactive. All the client needs to do is initiate the console session, and the user controls the test run interactively. This include selection & running of suites and tests, and viewing test results.

#include <CUnit/Console.h>

void CU_console_run_tests(void)
Initiate an interactive test run in the console.

 

Interactive Curses Interface

The curses interface is interactive. All the client needs to do is initiate the curses session, and the user controls the test run interactively. This include selection & running of suites and tests, and viewing test results. Use of this interface requires linking the ncurses library into the application.

#include <CUnit/CUCurses.h>

void CU_curses_run_tests(void)
Initiate an interactive test run in curses.

 

ERROR HANDLING

 

CUnit Error Status Codes

Many CUnit functions set a framework error code when an exception occurs. The error codes are an enum named CU_ErrorCode declared in header file <CUnit/CUError.h> (included automatically by <CUnit/CUnit.h> ). The following functions are provided for retrieving the framework error status:

#include <CUnit/CUError.h> (included automatically by <CUnit/CUnit.h>)

CU_ErrorCode CU_get_error(void)
Returns the framework error status code.
const char* CU_get_error_msg(void)
Returns a message for the current error code.

 

Error Actions

By default, CUnit continues running tests when a framework error occurs. This 'error action' can be changed by the user if desired. The following functions are provided:

#include <CUnit/CUError.h> (included automatically by <CUnit/CUnit.h>)

void CU_set_error_action(CU_ErrorAction action)
Set the framework error action.
CU_ErrorAction CU_get_error_action(void)
Retrieve the current error action.

The error actions are defined in enum CU_ErrorAction in header file <CUnit/CUError.h> (included automatically by <CUnit/CUnit.h> ) as follows:

CUEA_IGNORE
Continue test runs on framework errors (default).
CUEA_FAIL
Stop test runs on a framework error.
CUEA_ABORT
Exit the application on a framework error.

 

AUTHORS

Anil Kumar <anilsaharan@users.sourceforge.net>
Jerry St.Clair <jds2@users.sourceforge.net>

 

WEBSITE

http://cunit.sourceforge.net


 

Index

NAME
SYNOPSIS
DESCRIPTION
STRUCTURE & GENERAL USAGE
WRITING TEST FUNCTIONS
THE TEST REGISTRY
MANAGING TESTS AND SUITES
Adding Suites to the Registry
Adding Tests to Suites
RUNNING TESTS
Test Results
Automated Interface
Basic Interface (non-interactive)
Interactive Console Interface
Interactive Curses Interface
ERROR HANDLING
CUnit Error Status Codes
Error Actions
AUTHORS
WEBSITE

This document was created by man2html, using the manual pages.
Time: 21:43:59 GMT, April 16, 2011