pid_t wait(int *stat_loc);
pid_t waitpid(pid_t pid, int *stat_loc, int options);
The wait() and waitpid() functions shall obtain status information pertaining to one of the caller's child processes. Various options permit status information to be obtained for child processes that have terminated or stopped. If status information is available for two or more child processes, the order in which their status is reported is unspecified.
The wait() function shall suspend execution of the calling thread until status information for one of the terminated child processes of the calling process is available, or until delivery of a signal whose action is either to execute a signal-catching function or to terminate the process. If more than one thread is suspended in wait() or waitpid() awaiting termination of the same process, exactly one thread shall return the process status at the time of the target process termination. If status information is available prior to the call to wait(), return shall be immediate.
The waitpid() function shall be equivalent to wait() if the pid argument is (pid_t)-1 and the options argument is 0. Otherwise, its behavior shall be modified by the values of the pid and options arguments.
The pid argument specifies a set of child processes for which status is requested. The waitpid() function shall only return the status of a child process from this set:
The options argument is constructed from the bitwise-inclusive OR of zero or more of the following flags, defined in the <sys/wait.h> header:
If the calling process has SA_NOCLDWAIT set or has SIGCHLD set to SIG_IGN, and the process has no unwaited-for children that were transformed into zombie processes, the calling thread shall block until all of the children of the process containing the calling thread terminate, and wait() and waitpid() shall fail and set errno to [ECHILD].
If wait() or waitpid() return because the status of a child process is available, these functions shall return a value equal to the process ID of the child process. In this case, if the value of the argument stat_loc is not a null pointer, information shall be stored in the location pointed to by stat_loc. The value stored at the location pointed to by stat_loc shall be 0 if and only if the status returned is from a terminated child process that terminated by one of the following means:
Regardless of its value, this information may be interpreted using the following macros, which are defined in <sys/wait.h> and evaluate to integral expressions; the stat_val argument is the integer value pointed to by stat_loc.
Evaluates to a non-zero value if status was returned for a child process that terminated normally.
If the value of WIFEXITED(stat_val) is non-zero, this macro evaluates to the low-order 8 bits of the status argument that the child process passed to _exit() or exit(), or the value the child process returned from main().
Evaluates to a non-zero value if status was returned for a child process that terminated due to the receipt of a signal that was not caught (see <signal.h>).
If the value of WIFSIGNALED(stat_val) is non-zero, this macro evaluates to the number of the signal that caused the termination of the child process.
Evaluates to a non-zero value if status was returned for a child process that is currently stopped.
If the value of WIFSTOPPED(stat_val) is non-zero, this macro evaluates to the number of the signal that caused the child process to stop.
Evaluates to a non-zero value if status was returned for a child process that has continued from a job control stop.
It is unspecified whether the status value returned by calls to wait() or waitpid() for processes created by posix_spawn() or posix_spawnp() can indicate a WIFSTOPPED(stat_val) before subsequent calls to wait() or waitpid() indicate WIFEXITED(stat_val) as the result of an error detected before the new process image starts executing.
It is unspecified whether the status value returned by calls to wait() or waitpid() for processes created by posix_spawn() or posix_spawnp() can indicate a WIFSIGNALED(stat_val) if a signal is sent to the parent's process group after posix_spawn() or posix_spawnp() is called.
If the information pointed to by stat_loc was stored by a call to waitpid() that specified the WUNTRACED flag and did not specify the WCONTINUED flag, exactly one of the macros WIFEXITED(*stat_loc), WIFSIGNALED(*stat_loc), and WIFSTOPPED(*stat_loc) shall evaluate to a non-zero value.
If the information pointed to by stat_loc was stored by a call to waitpid() that specified the WUNTRACED and WCONTINUED flags, exactly one of the macros WIFEXITED(*stat_loc), WIFSIGNALED(*stat_loc), WIFSTOPPED(*stat_loc), and WIFCONTINUED(*stat_loc) shall evaluate to a non-zero value.
If the information pointed to by stat_loc was stored by a call to waitpid() that did not specify the WUNTRACED or WCONTINUED flags, or by a call to the wait() function, exactly one of the macros WIFEXITED(*stat_loc) and WIFSIGNALED(*stat_loc) shall evaluate to a non-zero value.
If the information pointed to by stat_loc was stored by a call to waitpid() that did not specify the WUNTRACED flag and specified the WCONTINUED flag, or by a call to the wait() function, exactly one of the macros WIFEXITED(*stat_loc), WIFSIGNALED(*stat_loc), and WIFCONTINUED(*stat_loc) shall evaluate to a non-zero value.
If _POSIX_REALTIME_SIGNALS is defined, and the implementation queues the SIGCHLD signal, then if wait() or waitpid() returns because the status of a child process is available, any pending SIGCHLD signal associated with the process ID of the child process shall be discarded. Any other pending SIGCHLD signals shall remain pending.
Otherwise, if SIGCHLD is blocked, if wait() or waitpid() return because the status of a child process is available, any pending SIGCHLD signal shall be cleared unless the status of another child process is available.
For all other conditions, it is unspecified whether child status will be available when a SIGCHLD signal is delivered.
There may be additional implementation-defined circumstances under which wait() or waitpid() report status. This shall not occur unless the calling process or one of its child processes explicitly makes use of a non-standard extension. In these cases the interpretation of the reported status is implementation-defined.
If a parent process terminates without waiting for all of its child processes to terminate, the remaining child processes shall be assigned a new parent process ID corresponding to an implementation-defined system process.
If wait() or waitpid() returns because the status of a child process is available, these functions shall return a value equal to the process ID of the child process for which status is reported. If wait() or waitpid() returns due to the delivery of a signal to the calling process, -1 shall be returned and errno set to [EINTR]. If waitpid() was invoked with WNOHANG set in options, it has at least one child process specified by pid for which status is not available, and status is not available for any process specified by pid, 0 is returned. Otherwise, (pid_t)-1 shall be returned, and errno set to indicate the error.
The wait() function shall fail if:
The waitpid() function shall fail if:
The following sections are informative.
A call to the wait() or waitpid() function only returns status on an immediate child process of the calling process; that is, a child that was produced by a single fork() call (perhaps followed by an exec or other function calls) from the parent. If a child produces grandchildren by further use of fork(), none of those grandchildren nor any of their descendants affect the behavior of a wait() from the original parent process. Nothing in this volume of IEEE Std 1003.1-2001 prevents an implementation from providing extensions that permit a process to get status from a grandchild or any other process, but a process that does not use such extensions must be guaranteed to see status from only its direct children.
The waitpid() function is provided for three reasons:
The first two of these facilities are based on the wait3() function provided by 4.3 BSD. The function uses the options argument, which is equivalent to an argument to wait3(). The WUNTRACED flag is used only in conjunction with job control on systems supporting job control. Its name comes from 4.3 BSD and refers to the fact that there are two types of stopped processes in that implementation: processes being traced via the ptrace() debugging facility and (untraced) processes stopped by job control signals. Since ptrace() is not part of this volume of IEEE Std 1003.1-2001, only the second type is relevant. The name WUNTRACED was retained because its usage is the same, even though the name is not intuitively meaningful in this context.
The third reason for the waitpid() function is to permit independent sections of a process to spawn and wait for children without interfering with each other. For example, the following problem occurs in developing a portable shell, or command interpreter:
stream = popen("/bin/true"); (void) system("sleep 100"); (void) pclose(stream);
On all historical implementations, the final pclose() fails to reap the wait() status of the popen().
The status values are retrieved by macros, rather than given as specific bit encodings as they are in most historical implementations (and thus expected by existing programs). This was necessary to eliminate a limitation on the number of signals an implementation can support that was inherent in the traditional encodings. This volume of IEEE Std 1003.1-2001 does require that a status value of zero corresponds to a process calling _exit(0), as this is the most common encoding expected by existing programs. Some of the macro names were adopted from 4.3 BSD.
These macros syntactically operate on an arbitrary integer value. The behavior is undefined unless that value is one stored by a successful call to wait() or waitpid() in the location pointed to by the stat_loc argument. An early proposal attempted to make this clearer by specifying each argument as *stat_loc rather than stat_val. However, that did not follow the conventions of other specifications in this volume of IEEE Std 1003.1-2001 or traditional usage. It also could have implied that the argument to the macro must literally be *stat_loc; in fact, that value can be stored or passed as an argument to other functions before being interpreted by these macros.
The extension that affects wait() and waitpid() and is common in historical implementations is the ptrace() function. It is called by a child process and causes that child to stop and return a status that appears identical to the status indicated by WIFSTOPPED. The status of ptrace() children is traditionally returned regardless of the WUNTRACED flag (or by the wait() function). Most applications do not need to concern themselves with such extensions because they have control over what extensions they or their children use. However, applications, such as command interpreters, that invoke arbitrary processes may see this behavior when those arbitrary processes misuse such extensions.
Implementations that support core file creation or other implementation-defined actions on termination of some processes traditionally provide a bit in the status returned by wait() to indicate that such actions have occurred.
Allowing the wait() family of functions to discard a pending SIGCHLD signal that is associated with a successfully waited-for child process puts them into the sigwait() and sigwaitinfo() category with respect to SIGCHLD.
This definition allows implementations to treat a pending SIGCHLD signal as accepted by the process in wait(), with the same meaning of "accepted" as when that word is applied to the sigwait() family of functions.
Allowing the wait() family of functions to behave this way permits an implementation to be able to deal precisely with SIGCHLD signals.
In particular, an implementation that does accept (discard) the SIGCHLD signal can make the following guarantees regardless of the queuing depth of signals in general (the list of waitable children can hold the SIGCHLD queue):
An implementation that does not permit the wait() family of functions to accept (discard) a pending SIGCHLD signal associated with a successfully waited-for child, cannot make the guarantees described above for the following reasons:
Although it might be assumed that reliable queuing of all SIGCHLD signals generated by the system can make this guarantee, the counter-example is the case of a process that blocks SIGCHLD and performs an indefinite loop of fork()/ wait() operations. If the implementation supports queued signals, then eventually the system will run out of memory for the queue. The guarantee cannot be made because there must be some limit to the depth of queuing.
These cannot be guaranteed unless the wait() family of functions accepts the SIGCHLD signal. Otherwise, a fork()/ wait() executed while SIGCHLD is blocked (as in the system() function) will result in an invocation of the handler when SIGCHLD is unblocked, after the process has disappeared.
Although possible to make this guarantee, system() would have to set the SIGCHLD handler to SIG_DFL so that the SIGCHLD signal generated by its fork() would be discarded (the SIGCHLD default action is to be ignored), then restore it to its previous setting. This would have the undesirable side effect of discarding all SIGCHLD signals pending to the process.
exec() , exit() , fork() , waitid() , the Base Definitions volume of IEEE Std 1003.1-2001, <signal.h>, <sys/wait.h>