This is a mystery format, added to support a mysery EPROM loader
used by Alan Wilson <dvdsales@dvdlibrary.co.uk>
If you know the true name of this format, please let me know!
It bears a remarkable similarity to the Motorola S-Record format,
however I can find no reference to a "compressed" Motorola format.
The Lines
Each line contains normal ASCII characters, and "high bit on[rq]
characters, but the ASCII control characters are avoided (the
high-bit-on con characters are not avoided). Normal line
termination characters (CRLF or LF, depending on your system) are used.
The presence of high-bit-on characters makes this format unattractive to
send via email, as it must be wrapped as a binary attachment, increasing
its size.
In general, a single
byte per byte is used to encode values, however some values use two bytes,
according to the following table:
Byte Value
Encoding (1 or 2 chars)
0x00 .. 0x9F
0x40 .. 0xDF
0xA0 .. 0xAF
0x3A 0x30 .. 0x3A 0x3F
0xB0 .. 0xBF
0x3B 0x30 .. 0x3B 0x3F
0xC0 .. 0xCF
0x3C 0x30 .. 0x3C 0x3F
0xD0 .. 0xDF
0x3D 0x30 .. 0x3D 0x3F
oxE0 .. 0xFF
0xE0 .. 0xFF
The rest of this description, when refering to "bytes[rq] means byte
values encoded using the above table.
The Fields
Each line consists of 5 fields. These are the type field,
length field, address field, data field, and the checksum.
Type
Record Length
Address
Data
Checksum
Type
The type field is a 1 character field that specifies whether
the record is data (0x43), or termination (0x47).
Record Length
The record length field is a 1 byte field that specifies the
number of bytes in the record, excluding the type and
record length fields.
Address
This is a 4-byte address that specifies where the data
is to be loaded into memory.
Data
The data field contains the executable code, memory-loadable data
or descriptive information to be transferred.
Checksum
The checksum is an 1-byte field that represents the least significant
byte of the one's complement of the sum of the values represented by
the bytes making up the length, address, and data fields.
Record Types
0x43 (#)
A record containing data and the 4-byte address at which the data is
to reside.
0x47 (')
A termination record. The address field may contain the 4-byte address
of the instruction to which control is passed. There is no data field.
Size Multiplier
In general, binary data will expand in sized by approximately 1.5 times
when represented with this format.
COPYRIGHT
srec_cat
version 1.56
Copyright
(C)
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter Miller
The
srec_cat
program comes with ABSOLUTELY NO WARRANTY;
for details use the 'srec_cat -VERSion License' command.
This is free software
and you are welcome to redistribute it under certain conditions;
for details use the 'srec_cat -VERSion License' command.