Section: Your Own Document Language (7)Updated: 1996-2010Local indexUp
NAME
yodlmacros - Macros for the Yodl converters
SYNOPSIS
This manual page lists the standard macros of the Yodl package.
DESCRIPTION
The following list shows the macros defined by the Yodl converters
define and which can be used in Yodl documents. Refer to the Yodl user
guide, distributed with the Yodl package, for a full description.
NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion
behavior has changed. The current working directory no longer remains fixed at
the directory in which Yodl is called, but is volatile, changing to the
directory in which a yodl-file is located. This has the advantage that Yodl's
file inclusion behavior now matches the way C's #include directive
operates; it has the disadvantage that it may break some current
documents. Conversion, however is simple but can be avoided altogether if
Yodl's -L (--legacy-include) option is used. This affects the
(l)includefile, includeverbatim, notransinclude and verbinclude macros
(see below).
The following list shows all macros of the package in alphabetical
order.
abstract(text)
Defines an abstract for an article or report document. Abstracts are
not implemented for books or manpages. Must appear before
starting the document with the article or report macro.
addntosymbol(symbol)(n)(text)
Adds textn times to symbol. The value n may also be the name
of a defined counter (which itself will not be modified).
affiliation(site)
Defines an affiliation, to appear in the document titlepage below the
author field. Must appear before starting the document with
article, report or book. The affiliation is only printed when the
author field is not empty.
AfourEnlarged()
Enlarges the usable height of A4 paper by 2 cm.: the top margin is reduced by
2 cm. This macro should be called in the preamble. The macro is available only
for LaTeX conversions.
appendix()
Starts appendices
article(title)(author)(date)
Starts an article. The top-level sectioning command is (n)sect. In HTML
conversions only one output file is written.
bf(text)
Sets text in boldface.
bind(text)
Generate a binding character after text.
book(title)(author)(date)
Starts a book document. The top-level sectioning command is (n)chapter,
(n)part being optional. In HTML output files are created for each
chapter.
cell(contents)
Sets a table cell, i.e., one element in a row. With the man/ms converters
multiple blanks between cell() macro calls are merged into a single blank
character.
cells(nColumns)(contents)
Set a table cell over nColumns columns. In html, LaTeX and xml formats
the information in the combined cells will be centered. With man/ms
conversions the cells() macro simply calls the cell() macro, but here
the setmanalign() macro can be used to determine the alignment
of multiple cells.
cellsline(from)(count)
Sets a horizontal line starting at column number from over count
columns in a row. If from is less then the number of columns already added
to a row then it is ignored. This macro must be embedded in a row macro
defining a table row. To put a line across the table's full width use
rowline. To set horizontal lines across columns 1
until 2 and columns 4 until 5 table of a table use:
Starts a new page, when the output format permits. Under HTML a horizontal
line is drawn.
code(text)
Sets text in code font, and prevents it from being expanded.
For unbalanced parameter lists, use CHAR(40) to get
( and CHAR(41) to get ).
columnline(from)(to)
Sets a horizontal line over some columns in a row. Note that columnline
defines a row by itself, consisting of just a horizontal line spanning some of
its columns, rather than the table's full width, like rowline. The two
arguments represent column numbers. It is the responsibility of the author to
make sure that the from and to values are sensible. I.e.,
1 <= from <= to <= ncolumns
Note: this macro cannot be used if multiple lines must be set in one
row. In those cases the macro colsline should be used.
def(macroname)(nrofargs)(redefinition)
Defines macroname as a macro, having nrofargs arguments, and
expanding to redefinition. This macro is a shorthand for
DEFINEMACRO. An error occurs when the macro is already defined. Use
redef() to unconditionally define or redefine a macro.
description(list)
Sets list as a description list. Use dit(item) to
indicate items in the list.
dit(itemname)
Starts an item named itemname in a descriptive list. The list is either
enclosed by startdit() and enddit(), or is an argument to
description().
eit()
Indicates an item in an enumerated list. The eit() macro should be
an argument in enumerate().
ellipsis()
Sets ellipsis (...).
em(text)
Sets text as emphasized, usually italics.
email(address)
In HTML, this macro sets the address in a <a href="mailto=..">
locator. In other output formats, the address is sent to the output. The
email macro is a special case of url.
endcenter()
DEPRECATED. Use center().
enddit()
DEPRECATED. Use description().
endeit()
DEPRECATED. Use enumeration().
endit()
DEPRECATED. Use itemization().
endmenu()
DEPRECATED. Use menu().
endtable()
DEPRECATED. Use table().
enumerate(list)
DEPRECATED. Use enumeration().
enumeration(list)
enumeration() starts an enumerated list. Use eit() in the list to
indicate items in the list.
euro()
Sets the euro currency symbol in latex, html, (and possibly sgml and xml). In
all other conversions EUR which is the official textual abbreviation
(cf. http://ec.europa.eu/euro/entry.html) is written. Note that LaTeX
may require latexpackage()(eurosym).
fig(label)
This macro is a shorthand for figure ref(label) and just makes the typing
shorter, as in see fig(schematic) for .. See getfigurestring() and
setfigurestring() for the figure text.
figure(file)(caption)(label)
Sets the picture in file as a figure in the current document, using the
descriptive text caption. The label is defined as a placeholder for the
figure number and can be used in a corresponding ref statement. Note that
the file must be the filename without extension: By default,
Yodl will supply .gif
when in HTML mode, or .ps when in LaTeX mode. Figures in other modes may
not (yet) haven been implemented.
file(text)
Sets text as filename, usually boldface.
findex()
Generate an index entry for index f.
footnote(text)
Sets text as a footnote, or in parentheses when the output format
does not allow footnotes.
gagmacrowarning(name name ...)
Prevents the yodl program from printing cannot expand possible user
macro. E.g., if you have in your document the file(s) are .. then you
might want to put before that: gagmacrowarning(file). Calls
NOUSERMACRO.
getaffilstring()
Expands to the string that defines the name of Affiliation Information, by
default AFFILIATION INFORMATION. Can be redefined for national language
support by setaffilstring(). Currently, it is relevant only for txt.
getauthorstring()
Expands to the string that defines the name of Author Information, by
default AUTHOR INFORMATION. Can be redefined for national language
support by setauthorstring(). Currently, it is relevant only for txt.
getchapterstring()
Expands to the string that defines a `chapter' entry, by default Chapter.
Can be redefined for national language support by setchapterstring().
getdatestring()
Expands to the string that defines the name of Date Information, by
default DATE INFORMATION. Can be redefined for national language
support by setdatestring(). Currently, it is relevant only for txt.
getfigurestring()
Returns the string that defines a `figure' text, in captions or in the
fig() macro. The string can be redefined using the setfiguretext()
macro.
getpartstring()
Expands to the string that defines a `part' entry, by default Part. Can
be redefined for national language support by setpartstring().
gettitlestring()
Expands to the string that defines the name of Title Information, by
default TITLE INFORMATION. Can be redefined for national language
support by settitlestring(). Currently, it is relevant only for txt.
gettocstring()
Expands to the string that defines the name of the table of contents, by
default Table of Contents. Can be redefined for national language
support by settocstring().
htmlbodyopt(option)(value)
Adds option="value" to the options of the <body ...> tag in HTML
files. Useful options are, e.g., fgcolor and bgcolor, whose values
are expressed as #rrggbb, where rr are two hexadecimal digits of
the red component, gg two hexadecimal digits of the green component,
and bb two hexadecimal digits of the blue component.
htmlcommand(cmd)
Writes cmd to the output when converting to html. The cmd is not
further expanded by Yodl.
htmlheadopt(option)
Adds the literal text option to the current information in the head
section of an HTML document. Option may (or: should) contain plain html
text. A commonly occurring head option is link, defining, e.g., a style
sheet. Since that option is frequently used, it has received a dedicated
macro: htmlstylesheet. Like htmlbodyopt this macro should be placed in
the document's preamble.
htmlnewfile()
In HTML output, starts a new file. All other formats are not affected. Note
that you must take your own provisions to access the new file; say via links.
Also, it's safe to start a new file just befoore opening a new section, since
sections are accessible from the clickable table of contents. The HTML
converter normally only starts new files prior to a chapter definition.
htmlstylesheet(url)
Adds a <link rel="stylesheet" type="text/css" ...> element to the head
section of an HTML document, using url in its href field. The argument
url is not expanded, and should be plain HTML text, without
surrounding quotes. The macro htmlheadopt can also be used to put
information in the head-section of an HTML document, but htmlheadopt is of
a much more general nature. Like htmlbodyopt this macro should be placed
in the document's preamble.
htmltag(tagname)(start)
Sets tagname as a HTML tag, enclosed by < and >. When
start is zero, the tagname is prefixed with /.
ifnewparagraph(truelist)(falselist)
The macro ifnewparagraph should be called from the PARAGRAPH macro, if
defined. It will insert truelist if a new paragraph is inserted,
otherwise falselist is inserted (e.g., following two consecutive calls of
PARAGRAPH). This macro can be used to prevent the output of multiple blank
lines.
includefile(file)
Includes file. The default
extension .yo is supplied if necessary.
NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion
behavior has changed. The current working directory no longer remains fixed at
the directory in which Yodl is called, but is volatile, changing to the
directory in which a yodl-file is located. This has the advantage that Yodl's
file inclusion behavior now matches the way C's #include directive
operates; it has the disadvantage that it may break some current
documents. Conversion, however is simple but can be avoided altogether if
Yodl's -L (--legacy-include) option is used.
Furthermore, the includefile macro no longer defines a label. To define a
label just before the file's inclusion use lincludefile.
includeverbatim(file)
Include file into the output. No processing is done, file should
be in preformatted form, e.g.:
whenhtml(includeverbatim(foo.html))
NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion
behavior has changed. The current working directory no longer remains fixed at
the directory in which Yodl is called, but is volatile, changing to the
directory in which a yodl-file is located. This has the advantage that Yodl's
file inclusion behavior now matches the way C's #include directive
operates; it has the disadvantage that it may break some current
documents. Conversion, however is simple but can be avoided altogether if
Yodl's -L (--legacy-include) option is used.
it()
Indicates an item in an itemized list. The list is either surrounded by
startit() and endit(), or it is an argument to itemize().
itemization(list)
Sets list as an itemizationd list. Use it() to indicate items in the
list.
itemize(list)
DEPRECATED. Use itemization().
kindex()
Generate an index entry for index k.
label(labelname)
Defines labelname as an anchor for a link
command, or to stand for the last numbering of a section or figure in a
ref command.
langle()
Character <
languagedutch()
Defines the Dutch-language specific headers. Active this macro via
setlanguage(dutch).
languageenglish()
Defines the English-language specific headers. Active this macro via
setlanguage(english).
languageportugese()
Defines the Portugese-language specific headers. Active this macro via
setlanguage(portugese).
LaTeX()
The LaTeX symbol.
latexaddlayout(arg)
This macro is provided to add Yodl-interpreted text to your own LaTeX layout
commands. The command is terminated with an end-of-line.
See also the macro latexlayoutcmds()
latexcommand(cmd)
Writes cmd plus a white space to the output when converting to LaTeX. The
cmd is not further expanded by Yodl.
latexdocumentclass(class)
Forces the LaTeX
\documentclass{...} setting to class. Normally the class is
defined by the macros article, report or book. This macro
is an escape route incase you need to specify your own document class
for LaTeX. This option is a modifier and must
appear before the article, report or book macros.
latexlayoutcmds(NOTRANSs)
This macro is provided in case you want to put your own LaTeX layout commands
into LaTeX output. The NOTRANSs are pasted right after the
\documentclass stanza. The default is, of course, no local LaTeX
commands. Note that this macro does not overrule my favorite LaTeX
layout. Use nosloppyhfuzz() and standardlayout() to disable my favorite
LaTeX layout.
latexoptions(options)
Set latex options: documentclass[options].
This command must appear before the document type is
stated by article, report, etc..
latexpackage(options)(name)
Include latex package(s), a useful package is, e.g.,
epsf. This command must appear before the document type is
stated by article, report, etc..
lchapter(label)(title)
Starts a new chapter in books or reports, setting a label at
the beginning of the chapter.
Starts a letter written in the indicated language. The date of the letter is
set to `date', the subject of the letter will be `subject'. The letter starts
with `opening'. It is based on the `letter.cls' document class definition.
The macro is available for LaTeX only. Preamble command suggestions:
o
latexoptions(11pt)
o
a4enlarged()
o
letterreplyto(name)(address)(postalcode/city)
o
letterfootitem(phone)(number), maybe e-mail too.
o
letteradmin(yourdate)(yourref)
o
letterto(addressitem). Use a separate letterto() macro call
for each new line of the address.
letteraddenda(type)(value)
Adds an addendum at the end of a letter. `type' should be `bijlagen',
`cc' or `ps'.
letteradmin(yourdate)(yourref)
Puts `yourletterfrom' and `yourreference' elements in the letter. If left
empty, two dashes are inserted.
letterfootitem(name)(value)
Puts a footer at the bottom of letter-pages. Up to three will usually fit.
LaTeX only.
letterreplyto(name)(address)(zip city)
Defines the `reply to' address in LaTeX or txt-letters.
letterto(element)
Adds `element' as an additional line to the address in LaTeX letters.
link(description)(labelname)
In HTML output a clickable link with the text description is created that
points to the place where labelname is defined using the label macro.
Using link is similar to url, except that a hyperlink
is set pointing to a location in the same document. For output formats other
than HTML, only the description appears.
lref(description)(labelname)
This macro is a combination of the ref and link macros. In HTML
output a clickable link with the text description and the label value
is created that points to the place where labelname is defined using
the label macro. For output formats other than HTML, only the
description and the label value appears.
lsect(label)(title)
Starts a new section, setting a label at the beginning of the section.
lsubsect(label)(title)
Starts a new subsection. Other sectioning commands are
subsubsect and subsubsubsect. A label is added just before the
subsection.
lsubsubsect(label)(title)
Starts a sub-subsection, a label is added just before the section
lsubsubsubsect(label)(title)
Starts a sub-sub-sub section. This level of sectioning is not numbered, in
contrast to `higher' sectionings. A label is added just before the
subsubsubection.
lurl(locator)
An url described by its Locator. For small urls with readable addresses.
mailto(address)
Defines the default mailto address for HTML output. Must appear
before the document type is stated by article, report, etc..
makeindex()
Make index for latex.
mancommand(cmd)
Writes cmd to the output when converting to man. The cmd is not
further expanded by Yodl.
manpage(title)(section)(date)(source)(manual)
Starts a manual page document. The section argument must be a number,
stating to which section the manpage belongs to. Most often used are commands
(1), file formats (5) and macro packages (7). The sectioning commands in a
manpage are not(n)sect etc., but manpage...(). The first section
must be the manpagename, the last section must be the
manpageauthor. The standard manpage for section 1 contains the following
sections (in the given order): manpagename, manpagesynopsis,
manpagedescription, manpageoptions, manpagefiles,
manpageseealso, manpagediagnostics, manpagebugs,
manpageauthor. Optional extra sections can be added with
manpagesection. Standard manpageframes for several manpagesections
are provided in /usr/local/share/yodl/manframes.
manpageauthor()
Starts the AUTHOR entry in a manpage document. Must be the last section
of a manpage.
manpagebugs()
Starts the BUGS entry in a manpage document.
manpagedescription()
Starts the DESCRIPTION entry in a manpage document.
manpagediagnostics()
Starts the DIAGNOSTICS entry in a manpage document.
manpagefiles()
Starts the FILES entry in a manpage document.
manpagename(name)(short description)
Starts the NAME entry in a manpage document. The short description is
used by, e.g., the whatis database.
manpageoptions()
Starts the OPTIONS entry in a manpage document.
manpagesection(SECTIONNAME)
Inserts a non-required section named SECTIONNAME in a manpage
document. This macro can be used to augment `standard' manual pages with extra
sections, e.g., EXAMPLES. Note that the name of the extra section should
appear in upper case, which is consistent with the normal typesetting of
manual pages.
manpageseealso()
Starts the SEE ALSO entry in a manpage document.
manpagesynopsis()
Starts the SYNOPSIS entry in a manpage document.
mbox()
Unbreakable box in LaTeX. Other formats may have different opitions on
our unbreakable boxex.
menu(list)
DEPRECATED.
metaC(text)
Put a line comment in the output.
metaCOMMENT(text)
Write format-specific comment to the output.
mit()
DEPRECATED.
mscommand(cmd)
Writes cmd to the output when converting to ms. The cmd is not
further expanded by Yodl.
nchapter(title)
Starts a chapter (in a book or report) without generating a
number before the title and without placing an entry for the chapter in
the table of contents.
nemail(name)(address)
Named email.
A more consistent naming for url, lurl, email and nemail would be
nice.
nl()
Forces a newline; i.e., breaks the current line in two.
node(previous)(this)(next)(up)
DEPRECATED Defines a node with name this, and links to nodes previous, next
and (up), for the node command.
nodeprefix(text)
Prepend text to node names, e.g.
nodeprefix(LilyPond) sect(Overview)
Currently used in texinfo descriptions only.
nodeprefix(text)
Prepend text to node names, e.g.
nodeprefix(LilyPond) sect(Overview)
Currently used in texinfo descriptions only.
nodetext(text)
Use text as description for the next node, e.g.
nodetext(The GNU Music Typesetter)chapter(LilyPond)
Currently used in texinfo descriptions only.
nop(text)
Expand to text, to avoid spaces before macros e.g.: a. Although
a+sups(2) should have the same effect.
nosloppyhfuzz()
By default, LaTeX output contains commands that cause it to shut up about
hboxes that are less than 4pt overfull. When nosloppyhfuzz() appears
before stating the document type, LaTeX complaints are `vanilla'.
notableofcontents()
Prevents the generation of a table of contents. This is default in, e.g.,
manpage and plainhtml documents. When present, this option must
appear before stating the document type with article, report
etc..
notitleclearpage()
Prevents the generation of a clearpage() instruction after the typesetting
of title information. This instruction is default in all non article
documents. When present, must appear before stating the document type with
article, book or report.
notocclearpage()
With the LaTeX convertor, no clearpage() instruction is inserted
immediately beyond the document's table of contents. The clearpage()
instruction is default in all but the article document type. When present,
must appear before stating the document type with article, book or
report. With other convertors than the LaTeX convertor, it is ignored.)
notransinclude(filename)
Reads filename and inserts it literally in the text
not subject to macro expansion or character translation.
No information is written either before or after the file's contents, not even
a newline.
NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion
behavior has changed. The current working directory no longer remains fixed at
the directory in which Yodl is called, but is volatile, changing to the
directory in which a yodl-file is located. This has the advantage that Yodl's
file inclusion behavior now matches the way C's #include directive
operates; it has the disadvantage that it may break some current
documents. Conversion, however is simple but can be avoided altogether if
Yodl's -L (--legacy-include) option is used.
noxlatin()
When used in the preamble, the LaTeX converter disables the inclusion of the
file xlatin1.tex. Normally this file gets included in the LateX output
files to ensure the conversion of high ASCII characters (like e) to
LaTeX-understandable codes. (The file xlatin1.tex comes with the YODL
distribution.)
nparagraph(title)
Starts a non-numbered paragraph (duh, corresponds to subparagraph in latex).
npart(title)
Starts a part in a book document, but without numbering it and without
entering the title of the part in the table of contents.
nsect(title)
Starts a section, but does not generate a number before the title nor
an entry in the table of contents. Further sectioning commands are
nsubsect, nsubsubsect and nsubsubsubsect.
nsubsect(title)
Starts a non-numbered subsection.
nsubsubsect(title)
Starts a non-numbered sub-sub section.
nsubsubsect(title)
Starts a non-numbered sub-subsection.
paragraph(title)
Starts a parapgraph. This level of sectioning is not numbered, in
contrast to `higher' sectionings (duh, corresponds to subparagraph in latex).
part(title)
Starts a new part in a book document.
pindex()
Generate an index entry for index p.
plainhtml(title)
Starts a document for only a plain HTML conversion. Not available in
other output formats. Similar to article, except that an author- and
date field are not needed.
printindex()
Make index for texinfo (?).
quote(text)
Sets the text as a quotation. Usually, the text is indented, depending on the
output format.
rangle()
Inserts the right angle character (>).
redef(nrofargs)(redefinition)
Defines macro macro to expand to redefinition.
Similar to def, but any pre-existing definition is overruled. Use
ARGx in the redefinition part to indicate where the arguments should
be pasted. E.g., ARG1 places the first argument, ARG2 the second
argument, etc...
redefinemacro(nrofargs)(redefinition)
Defines macro macro to expand to redefinition.
Similar to def, but any pre-existing definition is overruled. Use
ARGx in the redefinition part to indicate where the arguments should
be pasted. E.g., ARG1 places the first argument, ARG2 the second
argument, etc... This commands is actually calling redef().
ref(labelname)
Sets the reference for labelname. Use label to define a label.
report(title)(author)(date)
Starts a report type document. The top-level sectioning command in a report
is chapter.
roffcmd(dotcmd)(sameline)(secondline)(thirdline)
Sets a t/nroff command that starts with a dot, on its own line. The arguments
are: dotcmd - the command itself, e.g., .IP; sameline - when not
empty, set following the dotcmd on the same line; secondline - when
not empty, set on the next line; thirdline - when not empty, set on the
third line. Note that dotcmd and thirdline are not further expanded by
YODL, the other arguments are.
row(contents)
The argument contents may contain a man-page alignment specification
(only one specification can be entered per row), using setmanalign(). If
omitted, the standard alignment is used. Furthermore it contains the contents
of the elements of the row, using cell() or cells() macros. If
cells() is used, setmanalign() should have been used too. In this
macro call only the cell(), cells() and setmanalign() macros
should be called. Any other macro call may produce unexpected results.
The row macro defines a counter XXcellnr that can be inspected and is
incremented by predefined macros adding columns to a row. The counter is
initially 0. Predefined macros adding columns to a row add the number of
columns they add to the row inserting the contents of those columns. These
macros rely on the correct value of this counter and any user-defined macros
adding columns to table rows should correctly update XXcellnr.
rowline()
Sets a horizontal line over the full width of the table. See also
columnline(). Use rowline() instead of a row() macro call to
obtain a horizontal line-separator.
sc(text)
Set text in small caps (or tt).
sect(title)
Starts a new section.
setaffilstring(name)
Defines name as the `affiliation information' string, by default
AFFILIATION INFORMATION. E.g., after setaffilstring(AFILIACION),
YODL outputs this Spanish string to describe the affiliation information.
Currently, it is relevant only for txt.
setauthorstring(name)
Defines name as the `Author information' string, by default
AUTHOR INFORMATION. E.g., after setauthorstring(AUTOR),
YODL outputs this portuguese string to describe the author information.
Currently, it is relevant only for txt.
setchapterstring(name)
Defines name as the `chapter' string, by default Chapter. E.g., after
setchapterstring(Hoofdstuk), YODL gains some measure of national language
support for Dutch. Note that LaTeX support has its own NLS, this macro doesn't
affect the way LaTeX output looks.
setdatestring(name)
Defines name as the `date information' string, by default
DATE INFORMATION. E.g., after setdatestring(DATA),
YODL outputs this portuguese string to describe the date information.
Currently, it is relevant only for txt.
setfigureext(name)
Defines the name as the `figure' extension. The extension should include
the period, if used. E.g., use setfigureext(.ps) if the extensions
of the figure-images should end in .ps
setfigurestring(name)
Defines the name as the `figure' text, used e.g. in figure captions. E.g.,
after setfigurestring(Figuur), Yodl uses Dutch names for figures.
sethtmlfigureext(ext)
Defines the filename extension for HTML figures, defaults to .jpg. Note
that a leading dot must be included in ext. The new extension takes effect
starting with the following usage of the figure macro. It is only active
in html, but otherwise acts identically as setfigureext().
setincludepath(name)
Sets a new value of the include-path specification used when opening .yo
files. A warning is issued when the path specification does not include a .:
element. Note that the local directory may still be an element of the new
include path, as the local directory may be the only or the last element of
the specification. For these eventualities the new path specification is not
checked.
setlanguage(name)
Installs the headers specific to a language. The argument must be the name of
a language, whose headers have been set by a corresponding
languageXXX() call. For example: languagedutch(). The
language macros should set the names of the headers of the following elements:
table of contents, affiliation, author, chapter, date, figure, part and title
setlatexalign(alignment)
This macro defines the table alignment used when setting tables in LaTeX.
Use as many l (for left-alignment), r
(for right alignment), and c (for centered-alignment) characters as there
are columns in the table. See also table()
setlatexfigureext(ext)
Defines the filename extension for encapsulated PostScript figures in LaTeX,
defaults to .ps. The dot must be included in t new extension ext. The
new extension takes effect starting with a following usage of the figure
macro. It is only active in LaTeX, but otherwise acts identically as
setfigureext().
setlatexverbchar(char)
Set the char used to quote LaTeX
\verb
sequences
setmanalign(alignment)
This macro defines the table alignment used when setting tables used in
man-pages (see tbl(1)). Use as many l (for left-alignment), r
(for right alignment), and c (for centered-alignment) characters as there
are columns in the table. Furthermore, s can be used to indicate that the
column to its left is combined (spans into) the current column. Use this
specification when cells spanning multiple columns are defined. Each row in a
table which must be convertable to a manpage may contain a separate
setmanalign() call. Note that neither rowline nor columnline
requires setmanalign() specifications, as these macros define rows by
themselves. It is the responsibility of the author to ensure that the number
of alignment characters is equal to the number of columns of the table.
setpartstring(name)
Defines name as the `part' string, by default Part. E.g., after
setpartstring(Teil), Yodl identifies parts in the German way. Note that
LaTeX output does its own national language support; this macro doesn't affect
the way LaTeX output looks.
setrofftab(x)
Sets the character separating items in a line of input data of a roff
(manpage) table. By default it is set to ~. This separator is used
internally, and needs only be changed (into some unique character) if the
table elements themselves contain ~ characters.
setrofftableoptions(optionlist)
Set the options for tbl table, default: none. Multiple options should be
separated by blanks, by default no option is used. From the tbl(1) manpage,
the following options are selected for consideration:
o
center Centers the table (default is left-justified)
o
expand Makes the table as wide as the current line length
o
box Encloses the table in a box
o
allbox Encloses each item of the table in a box
Note that starting with Yodl V 2.00 no default option is used anymore.
See also setrofftab() which is used to set the character separating
items in a line of input data.
settitlestring(name)
Defines name as the `title information' string, by default
TITLE INFORMATION. E.g., after settitlestring(TITEL),
YODL outputs this Dutch string to describe the title information.
Currently, it is relevant only for txt.
settocstring(name)
Defines name as the `table of contents' string, by default Table of
Contents. E.g., after settocstring(Inhalt), YODL identifies the table
of contents in the German way. Note that LaTeX output does its own national
language support; this macro doesn't affect the way LaTeX output looks.
sgmlcommand(cmd)
Writes cmd to the output when converting to sgml. The cmd is not
further expanded by Yodl.
sgmltag(tag)(onoff)
Similar to htmltag, but used in the SGML converter.
sloppyhfuzz(points)
By default, LaTeX output contains commands that cause it to shut up about
hboxes that are less than 4pt overfull. When sloppyhfuzz() appears
before stating the document type, LaTeX complaints occur only if hboxes are
overfull by more than points.
standardlayout()
Enables the default LaTeX layout. When this macro is absent, then the
first lines of paragraphs are not indented and the space between
paragraphs is somewhat larger. The standardlayout() directive must appear
before stating the document type as article, report, etc..
startcenter()
DEPRECATED. center() should be used.
startdit()
DEPRECATED. Use description().
starteit()
DEPRECATED. Use enumeration().
startit()
DEPRECATED. Use itemization().
startmenu()
DEPRECATED. Use menu().
starttable()
DEPRECATED. Use table().
subs(text)
Sets text in subscript in supporting formats
subsect(title)
Starts a new subsection. Other sectioning commands are
subsubsect and subsubsubsect.
subsubsect(title)
Starts a sub-subsection.
subsubsubsect(title)
Starts a sub-sub-sub-subsection. This level of sectioning is not numbered, in
contrast to `higher' sectionings.
sups(text)
Sets text in superscript in supporting formats
table(nColumns)(alignment)(Contents)
The table()-macro defines a table. Its first argument specifies the
number of columns in the table. Its second argument specifies the (standard)
alignment of the information within the cells as used by LaTeX or
man/ms. Use l for left-alignment, c for centered-alignment and r
for right alignment. Its third argument defines the contents of
the table which are the rows, each containing column-specifications and
optionally man/ms alignment definitions for this row.
See also the specialized setmanalign() macro.
tcell(text)
Roff helper to set a table textcell, i.e., a paragraph. For LaTeX
special table formatting p{} should be used.
telycommand(cmd)
Writes cmd to the output when converting to tely. The cmd is not
further expanded by Yodl.
TeX()
The TeX symbol.
texinfocommand(cmd)
Writes cmd to the output when converting to texinfo. The cmd is not
further expanded by Yodl.
tindex()
Generate an index entry for index t.
titleclearpage()
Forces the generation of a clearpage() directive following the title of a
document. This is already the default in books and reports, but can be
overruled with notitleclearpage(). When present, must appear in the
preamble; i.e., before the document type is stated with article,
book or report.
tocclearpage()
With the LaTeX convertor, a clearpage() directive if inserted,
immediately following the document's table of contents. This is already the
default in all but the article document type, but it can be overruled by
notocclearpage(). When present, it must appear in the preamble; i.e.,
before the document type is stated with article, book or
report. With other convertors than the LaTeX convertor, it is ignored.
tt(text)
Sets text in teletype font, and prevents it from being expanded.
For unbalanced parameter lists, use CHAR(40) to get
( and CHAR(41) to get ).
txtcommand(cmd)
Writes cmd to the output when converting to txt. The cmd is not
further expanded by Yodl.
url(description)(locator)
In LaTeX documents the description is sent to the output. For HTML,
a link is created with the descriptive text description and pointing
to locator. The locator should be the full URL, including
service; e.g, http://www.icce.rug.nl, but excluding the double
quotes that are necessary in plain HTML. Use the macro link to create
links within the same document. For other formats, something like
description [locator] will appear.
verb(text)
Sets text in verbatim mode: not subject to macro expansion or
character table expansion. The text appears literally on the output,
usually in a teletype font (that depends on the output format). This
macro is for larger chunks, e.g., listings. For unbalanced parameter
lists, use CHAR(40) to get ( and CHAR(41)
to get ).
verbinclude(filename)
Reads filename and inserts it literally in the text, set in verbatim mode.
not subject to macro expansion.The text appears literally on the output,
usually in a teletype font (that depends on the output format). This macro is
an alternative to verb(...), when the text to set in verbatim mode is
better kept in a separate file.
NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion
behavior has changed. The current working directory no longer remains fixed at
the directory in which Yodl is called, but is volatile, changing to the
directory in which a yodl-file is located. This has the advantage that Yodl's
file inclusion behavior now matches the way C's #include directive
operates; it has the disadvantage that it may break some current
documents. Conversion, however is simple but can be avoided altogether if
Yodl's -L (--legacy-include) option is used.
verbpipe(command)(text)
Pipe text through command, but don't expand the output.
vindex()
Generate an index entry for index v.
whenhtml(text)
Sends text to the output when in HTML conversion mode. The text is
further expanded if necessary.
whenlatex(text)
Sends text to the output when in LATEX conversion mode. The text is
further expanded if necessary.
whenman(text)
Sends text to the output when in MAN conversion mode. The text is
further expanded if necessary.
whenms(text)
Sends text to the output when in MS conversion mode. The text is
further expanded if necessary.
whensgml(text)
Sends text to the output when in SGML conversion mode. The text is
further expanded if necessary.
whentely(text)
Sends text to the output when in TELY conversion mode. The text is
further expanded if necessary.
whentexinfo(text)
Sends text to the output when in TEXINFO conversion mode. The text is
further expanded if necessary.
whentxt(text)
Sends text to the output when in TXT conversion mode. The text is
further expanded if necessary.
whenxml(text)
Sends text to the output when in XML conversion mode. The text is
further expanded if necessary.
xit(itemname)
Starts an xml menu item where the file to
which the menu refers to is the argument of the xit() macro. It
should be used as argument to xmlmenu(), which has a 3rd argument:
the default path prefixed to the xit() elements.
This macro is only available
within the xml-conversion mode. The argument must be a full filename,
including .xml extension, if applicable.
No .xml extension indicates a subdirectory, containing another sub-menu.
xmlcommand(cmd)
Writes cmd to the output when converting to xml. The cmd is not
further expanded by Yodl.
xmlmenu(order)(title)(menulist)
Starts an xmlmenu. Use itemization() to define the items. Only
available in xml conversion. The menutitle appears in the menu as the heading
of the menu. The menulist is a series of xit() elements, containing
the name of the file to which the menu refers as their argument (including a
final /). Prefixed to evert every xit()-element is the value of
XXdocumentbase.
Order is the the `order' of the menu. If omitted, no order is defined.
xmlnewfile()
In XML output, starts a new file. All other formats are not affected. Note
that you must take your own provisions to access the new file; say via links.
Also, it's safe to start a new file just befoore opening a new section, since
sections are accessible from the clickable table of contents. The XML
converter normally only starts new files prior to a chapter definition.
xmlsetdocumentbase(name)
Defines name as the XML document base. No default.
Only interpreted with xml conversions. It is used with the figure and xmlmenu
macros.
xmltag(tag)(onoff)
Similar to htmltag, but used in the XML converter.
OPTIONS
No options are relevant in respect to the macros.
FILES
The files in /usr/share/yodl define the converter's macro packages. The
scripts yodl2tex, yodl2html, yodl2man etc. perform the
conversions.