is the command-line tool for handling packages, and may be considered the user's "back-end" to other tools using the APT library. Several "front-end" interfaces exist, such as
option is given, one of the commands below must be present.
is used to resynchronize the package index files from their sources. The indexes of available packages are fetched from the location(s) specified in
/etc/apt/sources.list. For example, when using a Debian archive, this command retrieves and scans the
files, so that information about new and updated packages is available. An
should always be performed before an
dist-upgrade. Please be aware that the overall progress meter will be incorrect as the size of the package files cannot be known in advance.
is used to install the newest versions of all packages currently installed on the system from the sources enumerated in
/etc/apt/sources.list. Packages currently installed with new versions available are retrieved and upgraded; under no circumstances are currently installed packages removed, or packages not already installed retrieved and installed. New versions of currently installed packages that cannot be upgraded without changing the install status of another package will be left at their current version. An
must be performed first so that
knows that new versions of packages are available.
is used in conjunction with the traditional Debian packaging front-end,
follows the changes made by
field of available packages, and performs the actions necessary to realize that state (for instance, the removal of old and the installation of new packages).
in addition to performing the function of
upgrade, also intelligently handles changing dependencies with new versions of packages;
has a "smart" conflict resolution system, and it will attempt to upgrade the most important packages at the expense of less important ones if necessary. So,
command may remove some packages. The
file contains a list of locations from which to retrieve desired package files. See also
for a mechanism for overriding the general settings for individual packages.
is followed by one or more packages desired for installation or upgrading. Each package is a package name, not a fully qualified filename (for instance, in a Debian GNU/Linux system, libc6 would be the argument provided, not
libc6_1.9.6-2.deb). All packages required by the package(s) specified for installation will also be retrieved and installed. The
file is used to locate the desired packages. If a hyphen is appended to the package name (with no intervening space), the identified package will be removed if it is installed. Similarly a plus sign can be used to designate a package to install. These latter features may be used to override decisions made by apt-get's conflict resolution system.
A specific version of a package can be selected for installation by following the package name with an equals and the version of the package to select. This will cause that version to be located and selected for install. Alternatively a specific distribution can be selected by following the package name with a slash and the version of the distribution or the Archive name (stable, testing, unstable).
Both of the version selection mechanisms can downgrade packages and must be used with care.
This is also the target to use if you want to upgrade one or more already-installed packages without upgrading every package you have on your system. Unlike the "upgrade" target, which installs the newest version of all currently installed packages, "install" will install the newest version of only the package(s) specified. Simply provide the name of the package(s) you wish to upgrade, and if a newer version is available, it (and its dependencies, as described above) will be downloaded and installed.
mechanism allows you to create an alternative installation policy for individual packages.
If no package matches the given expression and the expression contains one of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and it is applied to all package names in the database. Any matches are then installed (or removed). Note that matching is done by substring so 'lo.*' matches 'how-lo' and 'lowest'. If this is undesired, anchor the regular expression with a '^' or '$' character, or create a more specific regular expression.
is identical to
except that packages are removed instead of installed. Note the removing a package leaves its configuration files in system. If a plus sign is appended to the package name (with no intervening space), the identified package will be installed instead of removed.
is identical to
except that packages are removed and purged (any configuration files are deleted too).
to fetch source packages. APT will examine the available packages to decide which source package to fetch. It will then find and download into the current directory the newest available version of that source package while respect the default release, set with the option
option or per package with the
syntax, if possible.
Source packages are tracked separately from binary packages via
type lines in the
file. This means that you will need to add such a line for each repository you want to get sources from. If you don't do this you will properly get another (newer, older or none) source version than the one you have installed or could install.
option is specified then the package will be compiled to a binary .deb using
is specified then the source package will not be unpacked.
A specific source version can be retrieved by postfixing the source name with an equals and then the version to fetch, similar to the mechanism used for the package files. This enables exact matching of the source package name and version, implicitly enabling the
Note that source packages are not tracked like binary packages, they exist only in the current directory and are similar to downloading source tar balls.
causes apt-get to install/remove packages in an attempt to satisfy the build dependencies for a source package.
is a diagnostic tool; it updates the package cache and checks for broken dependencies.
will download the given binary package into the current directoy.
clears out the local repository of retrieved package files. It removes everything but the lock file from
/var/cache/apt/archives/partial/. When APT is used as a
is run automatically. Those who do not use dselect will likely want to run
from time to time to free up disk space.
clears out the local repository of retrieved package files. The difference is that it only removes package files that can no longer be downloaded, and are largely useless. This allows a cache to be maintained over a long period without it growing out of control. The configuration option
will prevent installed packages from being erased if it is set to off.
is used to remove packages that were automatically installed to satisfy dependencies for some package and that are no more needed.
downloads a package changelog and displays it through
sensible-pager. The server name and base directory is defined in the
variable (e. g.
for Debian or
for Ubuntu). By default it displays the changelog for the version that is installed. However, you can specify the same options as for the
All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean options you can override the config file by using something like
or several other variations.
Do not consider recommended packages as a dependency for installing. Configuration Item:
Consider suggested packages as a dependency for installing. Configuration Item:
Download only; package files are only retrieved, not unpacked or installed. Configuration Item:
Fix; attempt to correct a system with broken dependencies in place. This option, when used with install/remove, can omit any packages to permit APT to deduce a likely solution. If packages are specified, these have to completely correct the problem. The option is sometimes necessary when running APT for the first time; APT itself does not allow broken package dependencies to exist on a system. It is possible that a system's dependency structure can be so corrupt as to require manual intervention (which usually means using
to eliminate some of the offending packages). Use of this option together with
may produce an error in some situations. Configuration Item:
-m, --ignore-missing, --fix-missing
Ignore missing packages; If packages cannot be retrieved or fail the integrity check after retrieval (corrupted package files), hold back those packages and handle the result. Use of this option together with
may produce an error in some situations. If a package is selected for installation (particularly if it is mentioned on the command line) and it could not be downloaded then it will be silently held back. Configuration Item:
Disables downloading of packages. This is best used with
to force APT to use only the .debs it has already downloaded. Configuration Item:
Quiet; produces output suitable for logging, omitting progress indicators. More q's will produce more quiet up to a maximum of 2. You can also use
to set the quiet level, overriding the configuration file. Note that quiet level 2 implies
-y, you should never use -qq without a no-action modifier such as -d, --print-uris or -s as APT may decided to do something you did not expect. Configuration Item:
-s, --simulate, --just-print, --dry-run, --recon, --no-act
No action; perform a simulation of events that would occur but do not actually change the system. Configuration Item:
Simulation run as user will deactivate locking (Debug::NoLocking) automatic. Also a notice will be displayed indicating that this is only a simulation, if the option
is set (Default: true). Neither NoLocking nor the notice will be triggered if run as root (root should know what he is doing without further warnings by
Simulate prints out a series of lines each one representing a dpkg operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets indicate broken packages and empty set of square brackets meaning breaks that are of no consequence (rare).
-y, --yes, --assume-yes
Automatic yes to prompts; assume "yes" as answer to all prompts and run non-interactively. If an undesirable situation, such as changing a held package, trying to install a unauthenticated package or removing an essential package occurs then
will abort. Configuration Item:
Show upgraded packages; Print out a list of all packages that are to be upgraded. Configuration Item:
Show full versions for upgraded and installed packages. Configuration Item:
-b, --compile, --build
Compile source packages after downloading them. Configuration Item:
Ignore package Holds; This causes
to ignore a hold placed on a package. This may be useful in conjunction with
to override a large number of undesired holds. Configuration Item:
Do not upgrade packages; When used in conjunction with
will prevent packages on the command line from being upgraded if they are already installed. Configuration Item:
Do not install new packages; When used in conjunction with
will prevent packages on the command line from being upgraded if they are not already installed. Configuration Item:
Force yes; This is a dangerous option that will cause apt to continue without prompting if it is doing something potentially harmful. It should not be used except in very special situations. Using
can potentially destroy your system! Configuration Item:
Instead of fetching the files to install their URIs are printed. Each URI will have the path, the destination file name, the size and the expected md5 hash. Note that the file name to write to will not always match the file name on the remote site! This also works with the
commands. When used with the
command the MD5 and size are not included, and it is up to the user to decompress any compressed files. Configuration Item:
Use purge instead of remove for anything that would be removed. An asterisk ("*") will be displayed next to packages which are scheduled to be purged.
is equivalent to the
command. Configuration Item:
Re-Install packages that are already installed and at the newest version. Configuration Item:
This option defaults to on, use
to turn it off. When on
will automatically manage the contents of
to ensure that obsolete files are erased. The only reason to turn it off is if you frequently change your source list. Configuration Item:
-t, --target-release, --default-release
This option controls the default input to the policy engine, it creates a default pin at priority 990 using the specified release string. This overrides the general settings in
/etc/apt/preferences. Specifically pinned packages are not affected by the value of this option. In short, this option lets you have simple control over which distribution packages will be retrieved from. Some common examples might be
-t sid. Configuration Item:
APT::Default-Release; see also the
Only perform operations that are 'trivial'. Logically this can be considered related to
will answer yes to any prompt,
will answer no. Configuration Item:
If any packages are to be removed apt-get immediately aborts without prompting. Configuration Item:
If the command is either
remove, then this option acts like running
command, removing the unused dependency packages. Configuration Item:
Only has meaning for the
commands. Indicates that the given source names are not to be mapped through the binary table. This means that if this option is specified, these commands will only accept source package names as arguments, rather than accepting binary package names and looking up the corresponding source package. Configuration Item:
--diff-only, --dsc-only, --tar-only
Download only the diff, dsc, or tar file of a source archive. Configuration Item:
Only process architecture-dependent build-dependencies. Configuration Item:
Ignore if packages can't be authenticated and don't prompt about it. This is useful for tools like pbuilder. Configuration Item:
Show a short usage summary.
Show the program version.
Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this configuration file. If configuration settings need to be set before the default configuration files are parsed specify a file with the
environment variable. See
for syntax information.
Set a Configuration Option; This will set an arbitrary configuration option. The syntax is
can be used multiple times to set different options.
Locations to fetch packages from. Configuration Item:
File fragments for locations to fetch packages from. Configuration Item:
APT configuration file. Configuration Item:
APT configuration file fragments. Configuration Item:
Version preferences file. This is where you would specify "pinning", i.e. a preference to get certain packages from a separate source or from a different version of a distribution. Configuration Item:
File fragments for the version preferences. Configuration Item:
Storage area for retrieved package files. Configuration Item:
Storage area for package files in transit. Configuration Item:
Storage area for state information for each package resource specified in
Storage area for state information in transit. Configuration Item:
apt-secure(8), The APT User's guide in /usr/share/doc/apt-doc/,
apt_preferences(5), the APT Howto.
returns zero on normal operation, decimal 100 on error.
m[blue]APT bug pagem. If you wish to report a bug in APT, please see
APT bug page
- SEE ALSO
- ORIGINAL AUTHORS
- CURRENT AUTHORS
This document was created by
using the manual pages.
Time: 22:01:16 GMT, April 16, 2011