is a tool to control the USB-level functionality of an Astribank.
The tool operates on a single Astribank at a time (given as parameter
to the -D command line option).
Required. The device to read from/write to. On modern UDEV-based system
this is usually /dev/bus/usb/bus_num/device_num,
where bus_num and device_num are the first two numbers in the
output of lsusb(8).
On older systems that use usbfs, it is usually
Set the TwinStar port number. Either 0 or 1.
Reset the Astribank and renumerate its USB connection to power on product ID.
Tyep can be: half or full.
(TODO: explain those).
Enable (1) or disable (0) the TwinStar watchdog. When enabled, the
Astribank will jump to the second port if this system is "not working"
and the system on the second port is available.
Query astribank properties via MPP protocol.
Renumerate the Astribank product number (e.g: from 1161 to 1162).
Increase verbosity. May be used multiple times.
Set debug mask to mask. Default is 0, 0xFF is "everything".
This manual page was written by Tzafrir Cohen <firstname.lastname@example.org> .
Permission is granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any
later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.