Poster of Linux kernelThe best gift for a Linux geek
CFETOOLUPDATE

CFETOOLUPDATE

Section: User Contributed Perl Documentation (8) Updated: 2004-09-21
Local index Up
 

NAME

cfetoolupdate - Update the database with a new value  

SYNOPSIS

cfetool update name --value|-V value [--path|-p directory name] [--time|-t seconds] [--daily|-d] [--weekly|-w] [--yearly|-y] [--cfenvd|-c] [--histograms|-H] [--verbose|-v] [--help|-h]  

DESCRIPTION

Takes a new value and uses it to update the database specified by name, located at the path specified by the -p argument, or the current working directory if the -p argument is ommitted. The value will be associated with the current time, unless the -t option is given. In order for cfetool to function properly, this command should be issued at least once during each interval specified by the --step option of "cfetool create".

The -d, -w and -y options specify the databases to update. If all three options are omitted, only the weekly database will be updated.  

OPTIONS

--value|-v value
Specifies a new value to update the database with.
--path|-p directory name
The directory in which the database specified by name can be found.
--time|-t
The time the value was collected, in seconds since epoch (January 1st, 1970). If this argument is omitted, the current time will be used.
--daily|-d
Update the daily averages database.
--weekly|-w
Update the weekly averages database.
--yearly|-y
Update the yearly averages database.
--cfenvd|-c
Communicate with cfengine. If this option is specified, cfetool will define classes understandable by cfagent. For more information, refer to the documentation for cfenvd.
--histograms|-H
Collect histogram information about the probability distribiution of fluctuations about the mean value over all times of day. Cfetool won't write anything to this file for the first four weeks, as it has to have reliable mean values in order to accurately calculate it.
--verbose|-v
Print details of the command's execution to the standard output stream.
--help|-h
Print a short help message and then exit.
 

OUTPUT

Before exiting, "cfetool update" will print one line to the standard output stream in the following format:

yrly=ynum,wkly=wnum,dly=dnum

ynum, wnum and dnum will be either the number 0 if the corresponding database was not updated, or a code indicating the state of the given statistic, as compared to an average of equivalent earlier times, as specified below:

 code    high|low|normal   meaning
 -------------------------------------------------------------
  -2     -                 no sigma variation
 -------------------------------------------------------------
  -4     low               within noise threshold, and within
  -5     normal              2 standard deviations from
  -6     high                expected value
 -------------------------------------------------------------
 -14     low               microanomaly: within noise
 -15     normal              threshold, but 2 or more standard
 -16     high                deviations from expected value
 -------------------------------------------------------------
 -24     low               normal; within 1 standard deviation
 -25     normal              from the expected value
 -26     high                
 -------------------------------------------------------------
 -34     low               dev1; more than 1 standard 
 -35     normal              deviation from the expected
 -36     high                value
 ------------------------------------------------------------
 -44     low               dev2; more than 2 standard
 -45     normal              deviations from the expected
 -46     high                value
 -------------------------------------------------------------
 -54     low               anomaly; more than 3 standard
 -55     normal              deviations from the expected
 -56     high                value

Where ``low'' indicates that the current value is below both the expected value for the current time position, and the global average value. ``high'' indicates that the current value is above those values. ``normal'' indicates that the current value is within the range of expected values.

"cfetool update" also exits with a code corresponding to the above table. If more than one database is being updated, the most negative result from the updates is returned, and the individual results must be obtained from the standard output stream, as described above.  

EXAMPLE

  % cfetool update temperature --path /my/path --value 14.5 --histograms
  yrly=0,wkly=-6,dly=0

Updates the weekly temperature database and histogram files located in /my/path/ with the value 14.5 using the current time as the update time. The output indicates that only a weekly database was updated, and the new value given was within cfetool's noise threshold, and also within 2 standard deviations of the previous average stored in the database.  

AUTHORS

The code and documentation were contributed by Stanford Linear Accelerator Center, a department of Stanford University. This documentation was written by
Elizabeth Cassell <e_a_c@mailsnare.net> and
Alf Wachsmann <alfw@slac.stanford.edu>
 

COPYRIGHT AND DISCLAIMER

 Copyright 2004 Alf Wachsmann <alfw@slac.stanford.edu> and
                Elizabeth Cassell <e_a_c@mailsnare.net>
 All rights reserved.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
OUTPUT
EXAMPLE
AUTHORS
COPYRIGHT AND DISCLAIMER

This document was created by man2html, using the manual pages.
Time: 22:01:24 GMT, April 16, 2011