dahdi_test --- Test if the DAHDI timer provides timely response
dahdi_test [ -v ]
dahdi_test runs a timing test in a loop and prints the result of each loop.
The test is as follows:
It reads 8192 bytes from the DAHDI timer device (/dev/dahdi/pseudo).
This should take exactly 8000 ms . It uses calls to
before and after that read to check that indeed exactly 8000ms have passed.
Values of 100% and 99.99% Are normally considered a definite
Values of 99.98% and 99.97% are probably OK as well.
This manual page was written by Tzafrir Cohen <firstname.lastname@example.org>
Permission is granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any
later version published by the Free Software Foundation.