replies to DHCPv6 client as DHCPv6 server.
can give the following information to clients.
IPv6 prefixes for the requesting site
Non-temporary IPv6 addresses
A list of the DNS server addresses
DNS Domain Search List
A list of the NTP server addresses
A list of the SIP server addresses
SIP Server domain name
A list of the NIS server addresses
NIS domain name
A list of the NIS+ server addresses
NIS+ domain name
A list of the BCMCS server addresses
BCMCS Server domain name
Command line options are as below:
-c configfile
Use
configfile
as the configuration file.
-d
Print debugging messages.
-D
Even more debugging information is printed.
-f
Foreground mode (useful when debugging).
Although
usually prints warning, debugging, or error messages to
syslog(8),
it prints the messages to standard error if this option is
specified.
-k ctlkeyfile
Use
ctlkeyfile
to store the shared secret to authenticate the communication with
dhcp6ctl
The default file name used when unspecified is
/etc/wide-dhcpv6/dhcp6sctlkey
The default name is intentionally same as that for
dhcp6ctl
so that the server and the control command can share the file when
dhcp6ctl
controls the server on the same node,
which should be the typical case.
-p ctlport
Use
ctlport
as the port number listening on to communicate with
dhcp6ctl
-P pid-file
Use
pid-file
to dump the process ID of
.
FILES
/etc/wide-dhcpv6/dhcp6s.conf
is the default configuration file.
/var/lib/dhcpv6/dhcp6s_duid
is the default file to store the server's DUID.
/etc/wide-dhcpv6/dhcp6sctlkey
is the default key file to communicate with the control command.
See
dhcp6ctl(8)
for the file format.
/var/run/dhcp6s.pid
is the default file that contains pid of the currently running
.