dibbler-client
is a portable implementation of the DHCPv6 client. It supports both stateful
(i.e. IPv6 address granting) and stateless (i.e. options granting)
autoconfiguration. There are ports available for Linux 2.4/2.6 systems
as well as MS Windows XP and 2003. They are freely available under
GNU GPL
version 2 (or later) license.
SYNOPSIS
dibbler-client
[ run | start | stop | status | install | uninstall ]
OPTIONS
run
- starts client in the console. Client can be closed using ctrl-c.
start
- starts client in daemon mode.
stop
- stops running clients.
status
- shows status of the client and server.
install
- installs client as a service. This is not implemented yet.
uninstall
- uninstall client service. This is not implemented yet.
EXAMPLES
Let's start with simple configuration. We want receive one IPv6
address and there is only one Ethernet interface present. In that case
client.conf file might be completly empty. Dibbler client will request
for one IPv6 address on each up, running and multicast capable
interface (except loopback).
Now some real example. We want one IPv6 address and receive DNS
servers and domain name. We are also not interested in the details, so
debug mode is disabled.
log-mode short
log-level 6
iface eth0
{
ia { }
option dns-server
option domain
}
Next example: we want only NIS domain and NIS server information. That
information should be periodicaly renewed, so we use lifetime option. We
don't need any addresses so stateless mode is used.
All files are created in the /var/lib/dibbler directory. Dibbler
client reads /var/lib/dibbler/client.conf file. During operation,
Dibbler saves various file in that directory. After reception of the
DNS servers or domain informations, they are added to the
/etc/resolv.conf file. After shutdown, that information is removed
from that file. Option values are stored in the option-* files. Log
file is named client.log.
STANDARDS
This implementation aims at conformance to the following standards:
RFC 3315
DHCP for IPv6
RFC 3319
SIP options for DHCPv6
RFC 3646
DNS server options for DHCPv6
RFC 3736
Stateless DHCPv6
RFC 3898
NIS options for DHCPv6
Also options specified in following drafts are implemented:
draft-ietf-dhc-dhcpv6-opt-timeconfig-03.txt
NTP and timezone options.
Bugs are tracked with bugzilla, available at
http://klub.com.pl/bugzilla/. If you belive you have found a
bug, don't hesitate to report it.
AUTHOR
Dibbler was developed as master thesis on the Technical University of
Gdansk by Tomasz Mrugalski and Marek Senderski. Currently Marek has
not enough free time, so this project is being developed by Tomasz
Mrugalski. Authors can be reached at thomson@klub.com.pl and
msend@o2.pl
SEE ALSO
There is dibbler-server(8) manual page. You are also advised to take a
look at project website located at
http://klub.com.pl/dhcpv6/.
As far as authors know, this is the only Windows DHCPv6 stateful
implementation available. It is also one of two freely available under
Linux. The other Linux implementation is available at
http://dhcpv6.sourceforge.net,
but it is rather outdated and seems not being actively developed.