Poster of Linux kernelThe best gift for a Linux geek
DROBOM

DROBOM

Section: droboa (8) Updated: October
Local index Up
 

NAME

drobom - CLI for managing drobo units  

SYNOPSIS

drobom [ options ] <command> [ arguments... ]  

DESCRIPTION

 

options is one of:

-c, --command
the command to execute.
-d, --device
the device to operate on (default searches all devices and picks first one found.)
-h, --help
print a usage message
-v, --verbose
verbosity, a bit-field to trigger increased output as needed, mostly for debugging. 1 - General, 2 - Hardware Dialog, 4 - Initiation, 8 - DMP layer, 16- Detection 64 will print everything... (default: 0, as terse as possible.) 128 enables simulation mode (for testing when no Drobo is available. Dangerous!)
-V, --version
print the version id.

 

command is one of:

blink
identify the drobo by making the lights blink
diag
dump diagnostics file into /tmp directory
diagprint <diagdumpfile>
print diagnostics file to standard output


<diagdumpfile> the diagnostic dump file to print.

fwcheck query drobo.com for updates to firmware for the given Drobo
fwload load a specific firmware for the given Drobo. Arguments:


<fwimage> the firmware file to load.

fwupgrade
upgrade the firmware to the latest and greatest, recommended by DRI
help
print this text
info <toprint>
print information on a Drobo. The <toprint> argument is a comma separated list of the values below (default is to print all of them): config, capacity, protocol, settings, slots, firmware, status, options, luns
list
show device files for all Drobos found.
name <newname>
Set the name of the Drobo to the given value ( only firmware > 1.3.0 supports this command )
settime sync Drobo's clock to UTC
setlunsize Set the size of LUNS on device. Arguments:

<sz> integer number of TiB to set the lunsize to

<confirmation> Specify 'PleaseEraseMyData' if you really mean it

Note: After execution, Drobo reboots, wait a few minutes before accessing again

shutdown
shutdown drobo (DRI calls this 'standby')
status
report how is the Drobo doing
 

device

raw block device of a drobo (i.e. /dev/sdz) . If not given, assumes all attached drobos.  

AUTHOR

This manual page was written by Chris AtLee <chris@atlee.ca> for the Debian project (but may be used by others).


 

Index

NAME
SYNOPSIS
DESCRIPTION
options is one of:
command is one of:
device
AUTHOR

This document was created by man2html, using the manual pages.
Time: 22:01:33 GMT, April 16, 2011