EEXPRESS-DIAG
EEXPRESS-DIAG
Section: Maintenance Commands (8) Updated: March 8, 2001 Local index
Up
NAME
eexpress-diag - Diagnostic program for Intel EtherExpress 16
SYNOPSIS
eexpress-diag
[options]
DESCRIPTION
eexpress-diag is a programm which you can use to diagnose
problems with your Intel EtherExpress 16 cards.
OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (`-').
A summary of options is included below.
- -h, --help
-
Show summary of options.
- -V, --version
-
Show version of program.
- -v, --verbose
-
Verbose mode.
- -a, --all
-
Print all registers.
- -p, --base-address <port>
-
Specify port to use. Valid values are: 0x240, 0x280, 0x2C0, 0x300,
0x320, 0x340, 0x360
- -Q, -i, --irq <irq>
-
Specify new interrupt. Valid values are: 3-5,9-12,15.
- -w, --write-EEPROM <values>
-
Write to the EEPROMS with the specified values.
SEE ALSO
mii-diag(8)
AUTHOR
This manual page was written by Alain Schroeder <alain@debian.org>,
for the Debian GNU/Linux system (but may be used by others).
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- OPTIONS
-
- SEE ALSO
-
- AUTHOR
-
This document was created by
man2html,
using the manual pages.
Time: 22:01:34 GMT, April 16, 2011