fence_drac

Section: Maintenance Commands (8) Local index Up

NAME

fence_drac - fencing agent for Dell Remote Access Card

SYNOPSIS

fence_drac [OPTION]...

DESCRIPTION

fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to controlling power to a server. It logs into the DRAC through the telnet interface of the card. By default, the telnet interface is not enabled. To enable the interface, you will need to use the racadm command in the racser-devel rpm available from Dell. To enable telnet on the DRAC:

[root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1

[root]# racadm racreset

fence_drac accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_drac can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.dell.com

OPTIONS

-a IPaddress: IP address or hostname of the switch.
-c cmd_prompt: Force fence_drac to use cmd_prompt as the command prompt
-d dracversion: Force fence_drac to treat the device as though it was for the specified drac version
-D dumpfile: Debug file of the telnet interaction
-h: Print out a help message describing available options, then exit.
-l login: Login name.
-m modulename: The module name of the blade when using DRAC/MC firmware.
-o action: The action required. reboot (default), off, on or status.
-p password: Password for login.
-S path: Full path to an executable to generate the password for login.
-V: Print out a version message, then exit.

STDIN PARAMETERS

action = < param >: The action required. reboot (default), off, on or status.
agent = < param >: This option is used by fence_node(8) and is ignored by fence_apc.
cmd_prompt = < param >: Force fence_drac to use cmd_prompt as the command prompt
drac_version = < param >: Force fence_drac to treat the device as though it was for the specified drac version.
debug = < dumpfile >: Debug file of the telnet interaction
ipaddr = < hostname | ip >: IP address or hostname of the switch.
login = < param >: Login name.
modulename = < param >: The module name of the blade when using DRAC/MC firmware.
passwd = < param >: Password for login.
passwd_script = < param >: Full path to an executable to generate the password for login.

This document was created by man2html, using the manual pages.
Time: 22:01:37 GMT, April 16, 2011