fence_xvm

NAME

SYNOPSIS

DESCRIPTION

fence_xvm accepts options on the command line as well as from standard input. If no command line options are present, fence_xvm will automatically use standard input. fenced sends the options through stdin when it execs the agent. fence_xvm can be run by itself with command line options which is useful for testing.

OPTIONS

-d

Enable debugging output. The more times you specify this parameter, the more debugging output you will receive.

-i family

IP family to use (auto, ipv4, or ipv6; default = auto)

-a address

Multicast address to use (default=225.0.0.12 for ipv4, ff02::3:1 for ipv6)

-p port

Port to use for all communications; must match fence_xvmd (default=1229)

-r retrans

Multicast retransmission time (in 1/10 seconds; default=20). This is used to tune the amount of retransmission which is done on busy networks where multicast traffic is unreliable.

-C auth

Authentication type (none, sha1, sha256, sha512; default=sha256). This controls the authentication mechanism used to authenticate clients. The three SHA hashes use a key which must be shared between both the Xen virtual machines and the host domain-0 cluster. The three SHA authentication mechanisms use a simple bidirectional challenge-response based on pseudo- random number generation and a shared private key.

-c hash

Packet hash type (none, sha1, sha256, sha512; default=sha256). This controls the hashing mechanism used to authenticate fencing requests. The three SHA hashes use a key which must be shared between both the virtual machines and the host (physical) cluster.

-k key_file

Use the specified key file for packet hashing / SHA authentication. When both the hash type and the authentication type are set to "none", this parameter is ignored.

-H domain

This specifies unique domain name of the virtual machine name (or UUID) which needs to be fenced.

-u

Fence by UUID instead of virtual machine name. If specified, the above -H parameter should be the statically-defined 36-character UUID of the virtual machine rather than its human-readable name.

-o operation

Fencing operation to perform (null, off, reboot; default=off). This specifies the fencing operation to perform. The null operation does not actually do anything, but allows you to check to see if communication with fence_xvmd is working correctly (note: the result of the null operation is *always* failure!).

-t timeout

This specifies the amount of time, in seconds, to wait before a response to the multicast request before giving up (default=30).

-?

Print out a help message describing available options, then exit.

-h

Print out a help message describing available options, then exit.

-V

Print out a version message, then exit.

STDIN PARAMETERS

debug = 1

Same as the -d option. Specify numbers >1 for more debugging information.

family = < param >

Same as the -i option.

multicast_address = < param >

Same as the -a option.

port = < param >

Same as the -p option.

retrans = < param >

Same as the -r option.

auth = < param >

Same as the -C option.

hash = < param >

Same as the -c option.

key_file = < param >

Same as the -k option.

retrans = < param >

Same as the -r option.

domain = < param >

Same as the -H option.

use_uuid = 1

Same as the -u option.

option = < param >

Same as the -o option.

timeout = < param >

Same as the -t option.

domain = < param >

Same as the -H option.

SEE ALSO

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

STDIN PARAMETERS

SEE ALSO