Poster of Linux kernelThe best gift for a Linux geek
GNT-CLUSTER

GNT-CLUSTER

Section: (8) Updated: 16 July 2010
Local index Up

 

NAME

gnt-cluster - ganeti administration, cluster-wide  

SYNOPSIS

gnt-cluster command [ arguments... ]

 

DESCRIPTION

The gnt-cluster is used for cluster-wide administration in the ganeti system.  

COMMANDS

 

ADD-TAGS

add-tags [ --from file ] tag ...

Add tags to the cluster. If any of the tags contains invalid characters, the entire operation will abort.

If the --from option is given, the list of tags will be extended with the contents of that file (each line becomes a tag). In this case, there is not need to pass tags on the command line (if you do, both sources will be used). A file name of - will be interpreted as stdin.  

COMMAND

command [ -n node ] command

Executes a command on all nodes. If the option -n is not given, the command will be executed on all nodes, otherwise it will be executed only on the node(s) specified. Use the option multiple times for running it on multiple nodes, like:

          # gnt-cluster command -n node1.example.com -n node2.example.com date
        

The command is executed serially on the selected nodes. If the master node is present in the list, the command will be executed last on the master. Regarding the other nodes, the execution order is somewhat alphabetic, so that node2.example.com will be earlier than node10.example.com but after node1.example.com.

So given the node names node1, node2, node3, node10, node11, with node3 being the master, the order will be: node1, node2, node10, node11, node3.

The command is constructed by concatenating all other command line arguments. For example, to list the contents of the /etc directory on all nodes, run:

          # gnt-cluster command ls -l /etc
        
and the command which will be executed will be "ls -l /etc"  

COPYFILE

copyfile [ --use-replication-network ] [ -n node ] file

Copies a file to all or to some nodes. The argument specifies the source file (on the current system), the -n argument specifies the target node, or nodes if the option is given multiple times. If -n is not given at all, the file will be copied to all nodes. Passing the --use-replication-network option will cause the copy to be done over the replication network (only matters if the primary/secondary IPs are different). Example:

          # gnt-cluster -n node1.example.com -n node2.example.com copyfile /tmp/test
        
This will copy the file /tmp/test from the current node to the two named nodes.  

DESTROY

destroy --yes-do-it

Remove all configuration files related to the cluster, so that a gnt-cluster init can be done again afterwards.

Since this is a dangerous command, you are required to pass the argument --yes-do-it.  

GETMASTER

getmaster

Displays the current master node.  

INFO

info [ --roman ]

Shows runtime cluster information: cluster name, architecture (32 or 64 bit), master node, node list and instance list.

Passing the --roman option gnt-cluster info will try to print its integer fields in a latin friendly way. This allows further diffusion of Ganeti among ancient cultures.  

INIT

init
    [ -s secondary_ip ]
    [ -g vg-name ]
    [ --master-netdev vg-name ]
    [ -m mac-prefix ]
    [ --no-lvm-storage ]
    [ --no-etc-hosts ]
    [ --no-ssh-init ]
    [ --file-storage-dir dir ]
    [ --enabled-hypervisors hypervisors ]
    [ -t hypervisor name ]
    [ --hypervisor-parameters hypervisor:hv-param=value [ ,hv-param=value ... ] ]
    [ --backend-parameters be-param=value [ ,be-param=value ... ] ]
    [ --nic-parameters nic-param=value [ ,nic-param=value ... ] ]
    [ --maintain-node-health  { yes | no } ]
    [ --uid-pool user-id pool definition ]
    clustername

This commands is only run once initially on the first node of the cluster. It will initialize the cluster configuration and setup ssh-keys and more.

Note that the clustername is not any random name. It has to be resolvable to an IP address using DNS, and it is best if you give the fully-qualified domain name. This hostname must resolve to an IP address reserved exclusively for this purpose.

The cluster can run in two modes: single-home or dual-homed. In the first case, all traffic (both public traffic, inter-node traffic and data replication traffic) goes over the same interface. In the dual-homed case, the data replication traffic goes over the second network. The -s option here marks the cluster as dual-homed and its parameter represents this node's address on the second network. If you initialise the cluster with -s, all nodes added must have a secondary IP as well.

Note that for Ganeti it doesn't matter if the secondary network is actually a separate physical network, or is done using tunneling, etc. For performance reasons, it's recommended to use a separate network, of course.

The -g option will let you specify a volume group different than 'xenvg' for ganeti to use when creating instance disks. This volume group must have the same name on all nodes. Once the cluster is initialized this can be altered by using the modify command. If you don't want to use lvm storage at all use the --no-lvm-storage option. Once the cluster is initialized you can change this setup with the modify command.

The --master-netdev option is useful for specifying a different interface on which the master will activate its IP address. It's important that all nodes have this interface because you'll need it for a master failover.

The -m option will let you specify a three byte prefix under which the virtual MAC addresses of your instances will be generated. The prefix must be specified in the format XX:XX:XX and the default is aa:00:00.

The --no-lvm-storage option allows you to initialize the cluster without lvm support. This means that only instances using files as storage backend will be possible to create. Once the cluster is initialized you can change this setup with the modify command.

The --no-etc-hosts option allows you to initialize the cluster without modifying the /etc/hosts file.

The --no-ssh-init option allows you to initialize the cluster without creating or distributing SSH key pairs.

The --file-storage-dir option allows you set the directory to use for storing the instance disk files when using file storage as backend for instance disks.

The --enabled-hypervisors option allows you to set the list of hypervisors that will be enabled for this cluster. Instance hypervisors can only be chosen from the list of enabled hypervisors, and the first entry of this list will be used by default. Currently, the following hypervisors are available:

xen-pvm
Xen PVM hypervisor
xen-hvm
Xen HVM hypervisor
kvm
Linux KVM hypervisor
chroot
a simple chroot manager that starts chroot based on a script at the root of the filesystem holding the chroot
fake
fake hypervisor for development/testing

Either a single hypervisor name or a comma-separated list of hypervisor names can be specified. If this option is not specified, only the xen-pvm hypervisor is enabled by default.

The --hypervisor-parameters option allows you to set default hypervisor specific parameters for the cluster. The format of this option is the name of the hypervisor, followed by a colon and a comma-separated list of key=value pairs. The keys available for each hypervisors are detailed in the gnt-instance(8) man page, in the add command plus the following parameters which are only configurable globally (at cluster level):

migration_port
Valid for the Xen PVM and KVM hypervisors.

This options specifies the TCP port to use for live-migration. For Xen, the same port should be configured on all nodes in the /etc/xen/xend-config.sxp file, under the key ``xend-relocation-port''.

migration_bandwidth
Valid for the KVM hypervisor.

This option specifies the maximum bandwidth that KVM will use for instance live migrations. The value is in MiB/s.

This option is only effective with kvm versions >= 78 and qemu-kvm versions >= 0.10.0.

The --backend-parameters option allows you to set the default backend parameters for the cluster. The parameter format is a comma-separated list of key=value pairs with the following supported keys:

vcpus
Number of VCPUs to set for an instance by default, must be an integer, will be set to 1 if no specified.
memory
Amount of memory to allocate for an instance by default, can be either an integer or an integer followed by a unit (M for mebibytes and G for gibibytes are supported), will be set to 128M if not specified.
auto_balance
Value of the auto_balance flag for instances to use by default, will be set to true if not specified.

The --nic-parameters option allows you to set the default nic parameters for the cluster. The parameter format is a comma-separated list of key=value pairs with the following supported keys:

mode
The default nic mode, 'routed' or 'bridged'.
link
In bridged mode the default NIC bridge. In routed mode it represents an hypervisor-vif-script dependent value to allow different instance groups. For example under the KVM default network script it is interpreted as a routing table number or name.

The option --maintain-node-health allows to enable/disable automatic maintenance actions on nodes. Currently these include automatic shutdown of instances and deactivation of DRBD devices on offline nodes; in the future it might be extended to automatic removal of unknown LVM volumes, etc.

The --uid-pool option initializes the user-id pool. The user-id pool definition can contain a list of user-ids and/or a list of user-id ranges. The parameter format is a comma-separated list of numeric user-ids or user-id ranges. The ranges are defined by a lower and higher boundary, separated by a dash. The boundaries are inclusive. If the --uid-pool option is not supplied, the user-id pool is initialized to an empty list. An empty list means that the user-id pool feature is disabled.  

LIST-TAGS

list-tags

List the tags of the cluster.  

MASTERFAILOVER

masterfailover [ --no-voting ]

Failover the master role to the current node.

The --no-voting option skips the remote node agreement checks. This is dangerous, but necessary in some cases (for example failing over the master role in a 2 node cluster with the original master down). If the original master then comes up, it won't be able to start its master daemon because it won't have enough votes, but so won't the new master, if the master daemon ever needs a restart. You can pass --no-voting to ganeti-masterd on the new master to solve this problem, and gnt-cluster redist-conf to make sure the cluster is consistent again.  

MODIFY

modify
    [ -g vg-name ]
    [ --no-lvm-storage ]
    [ --enabled-hypervisors hypervisors ]
    [ --hypervisor-parameters hypervisor:hv-param=value [ ,hv-param=value ... ] ]
    [ --backend-parameters be-param=value [ ,be-param=value ... ] ]
    [ --nic-parameters nic-param=value [ ,nic-param=value ... ] ]
    [ --uid-pool user-id pool definition ]
    [ --add-uids user-id pool definition ]
    [ --remove-uids user-id pool definition ]
    [ -C candidate_pool_size ]
    [ --maintain-node-health  { yes | no } ]

Modify the options for the cluster.

The -g, --no-lvm-storarge, --enabled-hypervisors, --hypervisor-parameters, --backend-parameters, --nic-parameters, --maintain-node-health and --uid-pool options are described in the init command.

The -C option specifies the candidate_pool_size cluster parameter. This is the number of nodes that the master will try to keep as master_candidates. For more details about this role and other node roles, see the ganeti(7). If you increase the size, the master will automatically promote as many nodes as required and possible to reach the intended number.

The --add-uids and --remove-uids options can be used to modify the user-id pool by adding/removing a list of user-ids or user-id ranges.  

QUEUE

queue [ drain ] [ undrain ] [ info ]

Change job queue properties.

The drain option sets the drain flag on the job queue. No new jobs will be accepted, but jobs already in the queue will be processed.

The undrain will unset the drain flag on the job queue. New jobs will be accepted.

The info option shows the properties of the job queue.  

WATCHER

watcher { pause duration | continue | info }

Make the watcher pause or let it continue.

The pause option causes the watcher to pause for duration seconds.

The continue option will let the watcher continue.

The info option shows whether the watcher is currently paused.  

REDIST-CONF

redist-conf [ --submit ]

This command forces a full push of configuration files from the master node to the other nodes in the cluster. This is normally not needed, but can be run if the verify complains about configuration mismatches.

The --submit option is used to send the job to the master daemon but not wait for its completion. The job ID will be shown so that it can be examined via gnt-job info.  

REMOVE-TAGS

remove-tags [ --from file ] tag ...

Remove tags from the cluster. If any of the tags are not existing on the cluster, the entire operation will abort.

If the --from option is given, the list of tags will be extended with the contents of that file (each line becomes a tag). In this case, there is not need to pass tags on the command line (if you do, both sources will be used). A file name of - will be interpreted as stdin.  

RENAME

rename [ -f ] name

Renames the cluster and in the process updates the master IP address to the one the new name resolves to. At least one of either the name or the IP address must be different, otherwise the operation will be aborted.

Note that since this command can be dangerous (especially when run over SSH), the command will require confirmation unless run with the -f option.  

RENEW-CRYPTO

renew-crypto [ -f ]
    [ --new-cluster-certificate ] [ --new-confd-hmac-key ]
    [ --new-rapi-certificate ] [ --rapi-certificate rapi-cert ]

This command will stop all Ganeti daemons in the cluster and start them again once the new certificates and keys are replicated. The options --new-cluster-certificate and --new-confd-hmac-key can be used to regenerate the cluster-internal SSL certificate respective the HMAC key used by ganeti-confd(8). To generate a new self-signed RAPI certificate (used by ganeti-rapi(8)) specify --new-rapi-certificate. If you want to use your own certificate, e.g. one signed by a certificate authority (CA), pass its filename to --rapi-certificate.  

REPAIR-DISK-SIZES

repair-disk-sizes [ instance ... ]

This command checks that the recorded size of the given instance's disks matches the actual size and updates any mismatches found. This is needed if the Ganeti configuration is no longer consistent with reality, as it will impact some disk operations. If no arguments are given, all instances will be checked.

Note that only active disks can be checked by this command; in case a disk cannot be activated it's advised to use gnt-instance activate-disks --ignore-size ... to force activation without regard to the current size.

When the all disk sizes are consistent, the command will return no output. Otherwise it will log details about the inconsistencies in the configuration.  

SEARCH-TAGS

search-tags pattern

Searches the tags on all objects in the cluster (the cluster itself, the nodes and the instances) for a given pattern. The pattern is interpreted as a regular expression and a search will be done on it (i.e. the given pattern is not anchored to the beggining of the string; if you want that, prefix the pattern with ^).

If no tags are matching the pattern, the exit code of the command will be one. If there is at least one match, the exit code will be zero. Each match is listed on one line, the object and the tag separated by a space. The cluster will be listed as /cluster, a node will be listed as /nodes/name, and an instance as /instances/name. Example:

# gnt-cluster search-tags time
/cluster ctime:2007-09-01
/nodes/node1.example.com mtime:2007-10-04
 

VERIFY

verify [ --no-nplus1-mem ]

Verify correctness of cluster configuration. This is safe with respect to running instances, and incurs no downtime of the instances.

If the --no-nplus1-mem option is given, ganeti won't check whether if it loses a node it can restart all the instances on their secondaries (and report an error otherwise).  

VERIFY-DISKS

verify-disks

The command checks which instances have degraded DRBD disks and activates the disks of those instances.

This command is run from the ganeti-watcher tool, which also has a different, complementary algorithm for doing this check. Together, these two should ensure that DRBD disks are kept consistent.  

VERSION

version

Show the cluster version.  

REPORTING BUGS

Report bugs to <URL:http://code.google.com/p/ganeti/> or contact the developers using the ganeti mailing list <ganeti@googlegroups.com>.  

SEE ALSO

Ganeti overview and specifications: ganeti(7) (general overview), ganeti-os-interface(7) (guest OS definitions).

Ganeti commands: gnt-cluster(8) (cluster-wide commands), gnt-job(8) (job-related commands), gnt-node(8) (node-related commands), gnt-instance(8) (instance commands), gnt-os(8) (guest OS commands), gnt-backup(8) (instance import/export commands), gnt-debug(8) (debug commands).

Ganeti daemons: ganeti-watcher(8) (automatic instance restarter), ganeti-cleaner(8) (job queue cleaner), ganeti-noded(8) (node daemon), ganeti-masterd(8) (master daemon), ganeti-rapi(8) (remote API daemon).  

COPYRIGHT

Copyright (C) 2006, 2007, 2008, 2009 Google Inc. Permission is granted to copy, distribute and/or modify under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.


 

Index

NAME
SYNOPSIS
DESCRIPTION
COMMANDS
ADD-TAGS
COMMAND
COPYFILE
DESTROY
GETMASTER
INFO
INIT
LIST-TAGS
MASTERFAILOVER
MODIFY
QUEUE
WATCHER
REDIST-CONF
REMOVE-TAGS
RENAME
RENEW-CRYPTO
REPAIR-DISK-SIZES
SEARCH-TAGS
VERIFY
VERIFY-DISKS
VERSION
REPORTING BUGS
SEE ALSO
COPYRIGHT

This document was created by man2html, using the manual pages.
Time: 22:01:42 GMT, April 16, 2011