Poster of Linux kernelThe best gift for a Linux geek
LIEBERT

LIEBERT

Section: NUT Manual (8) Updated: 12/24/2010
Local index Up
 

NAME

liebert - Driver for Liebert contact-closure UPS equipment  

NOTE

This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).  

SUPPORTED HARDWARE

This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.  

EXTRA ARGUMENTS

This driver does not support any extra settings in the ups.conf(5).  

BUGS

This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work.

There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver.  

SEE ALSO

 

The core driver:

nutupsdrv(8)  

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/


 

Index

NAME
NOTE
SUPPORTED HARDWARE
EXTRA ARGUMENTS
BUGS
SEE ALSO
The core driver:
Internet resources:

This document was created by man2html, using the manual pages.
Time: 22:01:54 GMT, April 16, 2011