Section: Maintenance Commands (8) Updated: 2005/10/22 Local index
pccardctl - PCMCIA card control utility
lspcmcia - display extended PCMCIA debugging information
pccardctl [-V] [-v ...] command [socket]
lspcmcia [-V] [-v ...] [socket]
pccardctl is used to monitor and control the state of PCMCIA
sockets. If a socket number is specified, the command will be applied
to just one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If
it is executed by an unpriviledged user, only the informational
commands are accessible.
lspcmcia is an alias for pccardctl ls, provided for convenience.
Display the current socket status flags.
Display the socket configuration, including power settings, interrupt
and I/O window settings, and configuration registers.
--not yet implemented
Display card identification information, including product
identification strings, manufacturer ID codes, and function ID codes.
Not yet implemented for cardbus cards. Use lspci instead.
Much like the ident command, but its output is formatted as a
series of Bourne-stype shell variable definitions for use in scripts.
Not yet implemented for cardbus cards.
Display extended debugging information about the PCMCIA sockets and
devices present in the system.
Shut down and then disable power for a socket.
Restore power to a socket, and re-configure for use.
Notify all client drivers that this card will be ejected, then cut
power to the socket.
Notify all client drivers that this card has just been inserted.
Show version information and exit.
Increase the verbosity of the
Giving this option twice increases verbosity further.
Daniel Ritz - email@example.com
based upon the original cardctl man page by
David Hinds - firstname.lastname@example.org
This document was created by
using the manual pages.
Time: 22:01:56 GMT, April 16, 2011