This program is part of the samba(7) suite.
nmbd is a server that understands and can reply to NetBIOS over IP name service requests, like those produced by SMB/CIFS clients such as Windows 95/98/ME, Windows NT, Windows 2000, Windows XP and LanManager clients. It also participates in the browsing protocols which make up the Windows "Network Neighborhood" view.
SMB/CIFS clients, when they start up, may wish to locate an SMB/CIFS server. That is, they wish to know what IP number a specified host is using.
Amongst other services, nmbd will listen for such requests, and if its own NetBIOS name is specified it will respond with the IP number of the host it is running on. Its "own NetBIOS name" is by default the primary DNS name of the host it is running on, but this can be overridden by the m[blue]netbios namem in smb.conf. Thus nmbd will reply to broadcast queries for its own name(s). Additional names for nmbd to respond on can be set via parameters in the smb.conf(5) configuration file.
nmbd can also be used as a WINS (Windows Internet Name Server) server. What this basically means is that it will act as a WINS database server, creating a database from name registration requests that it receives and replying to queries from clients for these names.
In addition, nmbd can act as a WINS proxy, relaying broadcast queries from clients that do not understand how to talk the WINS protocol to a WINS server.
The default path to this file is /etc/samba/lmhosts. See the lmhosts(5) man page for details on the contents of this file.
The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the m[blue]smb.conf.5.html#m parameter in the smb.conf file.
-s|--configfile <configuration file>
-p <UDP port number>
If running the server as a daemon at startup, this file will need to contain an appropriate startup sequence for the server.
When run as a WINS server (see the m[blue]wins supportm parameter in the smb.conf(5) man page), nmbd will store the WINS database in the file wins.dat in the var/locks directory configured under wherever Samba was configured to install itself.
If nmbd is acting as a browse master (see the m[blue]local masterm parameter in the smb.conf(5) man page, nmbd will store the browsing database in the file browse.dat in the var/locks directory configured under wherever Samba was configured to install itself.
To shut down an nmbd process it is recommended that SIGKILL (-9) NOT be used, except as a last resort, as this may leave the name database in an inconsistent state. The correct way to terminate nmbd is to send it a SIGTERM (-15) signal and wait for it to die on its own.
nmbd will accept SIGHUP, which will cause it to dump out its namelists into the file namelist.debug in the /var/run/samba directory. This will also cause nmbd to dump out its server database in the log.nmb file.
The debug log level of nmbd may be raised or lowered using smbcontrol(1) (SIGUSR[1|2] signals are no longer used since Samba 2.2). This is to allow transient problems to be diagnosed, whilst still running at a normally low log level.
This man page is correct for version 3 of the Samba suite.
inetd(8), smbd(8), smb.conf(5), smbclient(1), testparm(1), testprns(1), and the Internet RFC's rfc1001.txt, rfc1002.txt. In addition the CIFS (formerly SMB) specification is available as a link from the Web page http://samba.org/cifs/.
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.
The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.