Poster of Linux kernelThe best gift for a Linux geek
RHINO

RHINO

Section: NUT Manual (8) Updated: 12/24/2010
Local index Up
 

NAME

rhino - Driver for Brazilian Microsol RHINO UPS equipment  

NOTE

This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).  

SUPPORTED HARDWARE

This driver has been tested with :

• Rhino 6000 VA

• Rhino 7500 VA

• Rhino 10000 VA

• Rhino 20000 VA

All Rhino models are sinusoidal on-line.  

EXTRA ARGUMENTS

This driver support the following extra optional settings in ups.conf(5):

battext = n - (default = 0, no extra battery, where n = Ampere*hour )  

COMMANDS

• load.on - Turn on the load immediately

• load.off - Turn off the load immediately

• bypass.start - Put the UPS in bypass mode

• bypass.stop - Put the UPS out of bypass mode

• shutdown.stayoff - Shut down in 3 minutes and do not return
 

AUTHOR

Silvino B. Magalhães <sbm2yk@gmail.com>  

SEE ALSO

 

The core driver:

nutupsdrv(8)  

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/


 

Index

NAME
NOTE
SUPPORTED HARDWARE
EXTRA ARGUMENTS
COMMANDS
AUTHOR
SEE ALSO
The core driver:
Internet resources:

This document was created by man2html, using the manual pages.
Time: 22:02:15 GMT, April 16, 2011