Section: http://synce.sourceforge.net/ (8) Updated: November 2002 Local index
synce-serial-config - Configure a serial device for use with SynCE.
synce-serial-config serial-device [local_ip_address:remote_ip_address]
synce-serial-config is used to setup a connection using serial cable or
This configuration must be done with root privileges.
The name of the serial device that is used for the serial connection.
The IP adresses used for the serial connection. See pppd(8) for details about this configuration option.
This manual page was written by David Eriksson <firstname.lastname@example.org>.
synce(1) pppd(8) synce-serial-start(8) synce-serial-abort(8)
- SEE ALSO
This document was created by
using the manual pages.
Time: 22:02:28 GMT, April 16, 2011