This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.
If your Victron cable is broken or missing, use this diagram to build a clone:
This driver supports the following optional setting in the ups.conf(5):
The protocol for this UPS is not officially documented.
Radek Benedikt <firstname.lastname@example.org>, Daniel Prynych <Daniel.Prynych@hornet.cz>
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/